Care & Maintenance
Warranty
LIMITED WARRANTY
Diversified Casework products are guaranteed against material defect and/or faulty workmanship from plant for the period specified, up to and including lifetime, if specification conforms to AWI and SEFA standards. During this period Diversified Casework will replace or repair, at its discretion, any product that upon inspection, exhibits defects in material or workmanship. This warranty shall include the costs of replacement parts or materials but does not include labor, or shipping costs for such. This warranty does not cover damage in transit or damage caused by misuse, abuse or faulty installation, color grain or texture of wood or other covering materials. No other warranty is expressed or implied. WARRANTY TIME PERIOD FOR COVERED PRODUCTS Cabinets = Wood Acid & Flammable Storage Units = One Year Fume Hoods = Fixtures = One Year Metal Products & Cabinets (Includes Acid & Flammable Storage) = One Year
Diversified Casework uses the highest quality woods when building our laboratory furniture. Therefore when caring for our casework, treat it as you would any fine furniture. The following are guidelines to help you keep your science labs looking beautiful.
• After Installation - The cabinets should be wiped clean with a damp soft cloth. Follow this immediately with another clean soft cloth. Remember to always wipe in the direction of the grain of the wood. • Daily Maintenance - On a regular schedule the cabinets should be washed with a clean cloth dampened with a solution of mild soap and water. As earlier, rinse with a clean damp cloth and then dry with a dry clean cloth. This will help maintain the beauty of the cabinets and avoid dirty build-up. The soap and water combination will also remove most oils and grease spills. Permanent marker can be removed using acetone. Use caution when using acetone and be sure to rinse with a clean damp cloth and then dry with a clean cloth. • Excessive moisture - This can be very harmful to wood furniture. It is important to wipe up and dry any spills as quickly as possible. Areas that are especially susceptible are baseboard and sink areas.
This Warranty Claim must be completed by and filed with the local authorized dealer. The dealer will review any claims and forward the information to Diversified Woodcrafts, Inc. for response.
• Humidity – Excess humidity can result in warpage and possible damage to the finish of your cabinets.
ISSUED FOR PRODUCT
• Also, a lack of sufficient humidity during the winter heating season may cause problems such as splitting and cracking. It is important to control the humidity in your laboratory all year long. Humidity levels should be maintained between 17% and 70%per AWS Edition 1. Wood can absorb moisture and swell or dry out depending on the humidity levels. • Durcon Epoxy Resin Maintenance - Durcon products will not stain or etch when exposed to most chemicals. Periodic cleaning with detergents (not scouring powder) in recommended for epoxy resin surfaces. Products containing citrus oils or mineral oils should be lightly applied periodically. Waxes or other coatings should not be used. Scratches should not be sanded or filled. Permanent markers may be used to reduce the coloring of scratches.
LOCATION
AUTHORIZED DEALER
DEALER SIGNATURE
DATE ISSUED BY AUTHORIZED DEALER
DIVERSIFIED CASEWORK AUTHORIZED DEALER
DATE APPROVED
Rev. 2023.2.27
94
DiversifiedCasework.com | info@DiversifiedCasework.com | 877.348.9663
DiversifiedCasework.com | info@DiversifiedCasework.com | 877.348.9663
95
Made with FlippingBook interactive PDF creator