Rivaqua
Rivaqua: Demineralised water installations
Demineralised water installations, Tailored to your specific requirements
Customised setups for the production of demineralised water from tap water Removing minerals from the water supply,achieved through a combination of anionic and cationic resins. Conductivity meters with visual indication or digital read-out possible Reverse osmosis installations and softeners possible
Installation
Reference
Price
Total hardness in °F
€ 908.00
1 cartridge of mixed ion exchange resin (20 liters) + visual conductivity meter 5 µS/cm alarm set
RV DEMI COND 20
The graph illustrates the volume of water produced below 1 µS/cm with one cartrigde. The amount produced depends on the starting hardness of the water. Mentioned values are indicative.
€ 1305.00
1 cartridge of mixed ion exchange resin (20 liters) + digital conductivity meter 0.1-20 µS/cm alarm set
RV DEMI COND DIGIT 20
€ 1391.00
2 cartridge of mixed ion exchange resin (20 liters) + visual conductivity meter 5 µS/cm alarm set
RV DEMI COND 2x20
Regeneration service
€ 1740.00
2 cartridge of mixed ion exchange resin (20 liters) + digital conductivity meter 0.1-20 µS/cm alarm set
RV DEMI COND DIGIT 2x20
Over time, the resins reach saturation and the cartridge requires regeneration. A Filter Service driver collects the used cartridge while delivering a regenerated cartridge. Enjoy now your first regeneration for free when ordering a new Rivaqua system before 30.06.2026. Metion code RIVAQUA_REG_26 when ordering your regeneration.
€ 526.00
New 20-liter cartridge
RV DEMI 20
€ 217.50
Additional visual conductivity meter 5 µS/cm alarm set
RV DEMI COND
€ 580.00
Additional digital conductivity meter 0.1-20 µS/cm alarm set
RV DEMI COND DIGIT
Installation costs
€ 200.00
Installation costs
RV DEMI INSTALLATION
The first consulation visit is for free, but for installation by our technician additional costs apply, based on your location in Belgium / Luxembourg. Our technician starts from Lixhe, with distances mentioned one way. 0-25 km - Free
€ 62.50
Flow- regulated water gun
RV DEMI GUN
€ 259.39
Regeneration of a 20-liter cartridge
RV DEMI 20 REG-2
100-150 km - € 300.00 >150 km - € 400.00
Valid until 31.12.2026
If you require a customized setup, feel free to reach out to us. If necessary adjustments need to be made to your existing water system, additional charges may apply.
25 - 50 km - € 100.00 50 - 100 km - € 200.00
CSLM: Maintenance of equipment
Service levels Regulatory periodic inspection:
Together with our partner CSLM we can provide a full range of services to meet all needs for specific types of equipment. To ensure the safety of your staff, it is essential that all curcial laboratory equipment undergoes regular inspection and maintenance. (stipulated in the Belgian Official Gazette, Articles 320 to 326)
verification of safety points, manufacturer
recommendations, and terminal parameters T1 - preventive maintenance: includes the regulatory inspection plus lubrication, dust removal, and minor adjustments T1P - maintenance with parts: T1 plus replacement of wear parts if necessary Optional: metrology services Standard verification: one measurement per parameter Program verification: one measurement per program ISO 17025 accredited verification: nine measurements per speed with a certificate of compliance
Centrifuges
Universal ovens
CO ₂ incubators
Cryostats
Ultracentrifuges
Cryothermostats
Maintenance service description During each maintenance visit, CSLM performs: Equipment identification and functionality check
Open here a control report example
CSLM offers a range of services covering all needs for specific types of equipment, including i nstallation (IQ/OQ/PQ), inspection, maintenance, troubleshooting, metrology, and usage & maintenance advice. CSLM’s expertise has been recognized by institutions for over 30 years , providing support for all brands. With many years of experience working with centrifuges and laboratory equipment, the technicians bring in- depth expertise to every intervention. Their knowledge ensures precise diagnostics, efficient maintenance, and high-quality service to keep your equipment in optimal condition.
Complete cleaning and lubrication of mechanical parts Inspection of all control points and safety features Compliance validation with labor regulations Mechanical adjustments and calibration Replacement of worn parts Report discussion with the responsible supervisor Delivery of a detailed inspection report, also available online
Even for brands that are no longer on the market, CSLM can help you. With a stock of new, used and replacement parts for models from the oldest to the most recent.
info@filterservice.be - orders@filterservice.be - 087/59 51 70 - www.filterservice.be
info@filterservice.be - orders@filterservice.be - 087/59 11 00 - www.filterservice.be
Made with FlippingBook flipbook maker