System configurator for a remote control system via browser
Optional
Selection of central components
1
Using the optional central control panel, the settings of the individual rooms can be displayed and, in some cases, changed independently of the app or browser. The control unit has a contact/sensor input for central control (all rooms) of the b@home gate. A maximum of 1 central control unit can be taught to work with a b@home gate.
A minimal system consists of the central b@home gate component and at least one sensor and one actuator. With a b@home gate, up to 32 rooms or heating/cooling zones can be monitored and con- trolled. Further b@home gates can be operated in the same network if required.
FTRCUd 210.021#xx (various variants for optimum integration in almost all switch ranges)
b@home gate MGCBB-064.360
Selection of sensors
2
One sensor per room is required to measure the room temperature. Depending on the selected sensor, further functions may be available.
Sensor to detect room tempera- ture (The room tem- perature is set via browser).
Room controller to detect and set room temperature (Room temperature can also be changed via browser). You can use the room control panel to display and, in some cases, change settings for other rooms, including independently of the browser. A contact/sensor input for influencing the assigned room is available. Room control panels can be assigned for up to 16 rooms using a b@home gate.
Sensor to detect and set room temperature (It is possible to enable setting the room temperature using a browser instead of using the setpoint ad- juster).
Optional
Up to 7 additional sensors per room to detect the room tem- perature (for finding averages, e.g. in large rooms).
FTRFB-280.101
FTRCUd 210.021#xx (various variants for opti- mum integration in almost all switch ranges)
FTRFB-280.101
FTRFB-280.119
Catalogue 2022 | Page 16
Made with FlippingBook Digital Publishing Software