Controller for distributor assembly (hat rail) ITR 79 remote sensor, electronic
Technical data
Application
Housing colour:
grey, like RAL 7035
Control and monitoring of the tem- perature in large halls, greenhouses and floor heating systems. The de- vices have sensor rupture and sensor short-circuit protection. Sensors are not a part of the deliv- ery scope (except for ITR 79.804) For available sensors, see the ‘Sen- sor Technology’ chapter. Use sensors according to the speci- fied sensor number (for example, for sensor number 4: all sensors with this number can be used, e.g., KF-4). Avoid parallel routing of sensor wires together with mains voltage-bearing wires ore use shielded wires.
Ambient temperature: Permissible atmospheric humidity:
−10 … +40 °C
Max. 95% rel. humidity, non-condensing
Operating voltage:
230 VAC, 50 Hz
Max. switching current:
NO contact: 10 (2) A, NC contact: 5 (1.5) A The resistance of the contact transi- tion results in a voltage drop across the contact. This can have a strong influence on very small switching signals.
Min. switching current:
Max. switching voltage: Min. switching voltage: Switching element: Switching contact: Electrical connection: Mounting/attachment:
230 VAC, 50 Hz 5 VAC, 50 Hz
relay
toggler, potential-free
screw-type terminals up to 2.5 mm² on supporting rails (35 mm) according to EN 60715
Protection rating: Protection class: Safety and EMC: Function type: General features:
IP 20
II
according to DIN EN 60730 TR (temperature controller)
external setting
Type
Item no.
Control range Features
PG
ITR 79.402
D4780167
–35 … +15 °C Control function: heating, hysteresis adjustable: approx. 0.5 … 5 K, sensor: NTC 1 K (sensor 1), scale: Degrees Celsius, display “heating” red 0 … 60 °C Control function: heating, hysteresis adjustable: approx. 0.5 … 5 K, sensor: NTC 10 K (sensor 4), scale: degrees Celsius, display “heating” red 35 ... 95 °C Control function: heating, hysteresis adjustable: approx. 0.5 … 5 K, sensor: NTC 50 K (sensor 5), scale: Degrees Celsius, display “heating” red −10 … +40 °C Control function: heating, hysteresis adjustable: approx. 0.5 … 5 K, sensor: NTC 8 K (sensor 3), scale: Degrees Celsius, display “heating” red 0 … 11 °C Control function: heating, frost protection locked when the tem- perature is dropping, hysteresis approx. 1.5 K, sensor: NTC 2 K 25 (sensor 0), scale: degrees Celsius, display “heating” red 0 … 60 °C Control function: cooling, hysteresis adjustable: approx. 0.5 … 5 K, sensor: NTC 10 K (sensor 4), scale: Degrees Celsius, display “cooling” green −10 … +40 °C Control function: cooling, hysteresis adjustable: approx. 0.5 … 5 K, sensor: NTC 8 K (sensor 3), scale: degrees Celsius, display “cool- ing” green
II
ITR 79.404
D4780155
II
ITR 79.405
D4780181
II
ITR 79.408
D4780179
II
ITR 79.503
D4780524
II
ITR 79.504
D4780371
II
ITR 79.508
D4780369
II
Two setpoint adjusters (e.g. day/night temperature via external clock)
PG
ITR 79.600
D4780508
2 x 5 … 30 °C Control function: heating, hysteresis: approx. 0.5 K, sensor: NTC 47 K (sensor 2), ECO contact: toggling between setpoint value 1 and setpoint value 2, scale: degrees Celsius
II
Complete device including remote sensor HF-8/4-K2 (4-m cable)
PG
ITR 79.804
D4780545
0 … 60 °C Control function: heating, hysteresis adjustable: approx. 0.5 … 5 K, sensor: NTC 2 K (sensor 8), multi-digit scale 0 ... 6, display “heating” red
II
Accessories
Item no.
Features
PG
JZ-13
ZA990001
standard rail with drilled holes for fastening control cabinet controllers (length 40 mm)
II
Catalogue 2022 | Page 186
Made with FlippingBook Digital Publishing Software