Wireless Systems – CENTRAL COMPONENTS
Technical data
Application
Ambient temperature: Storage temperature: Permissible atmospher- ic humidity:
0 … 40 °C
alre wireless systems can be monitored and controlled over the Internet or WLAN/LAN using the new b@home gate MGCBB-064.360. After completing the free registration process at the b@home portal, users can operate the b@ home system simply and intuitively via a laptop/ PC. This allows users to control, monitor and reprogram the temperature controls, either for each individual room or centrally for all rooms. It is also possible to access the system without an Internet connection using the local WLAN/ LAN network. The b@home control unit FTRCUd 210.021 in conjunction with the b@home gate MGCBB-064.360 provides central access to the settings for further channels and can be used as a central control unit or room control unit. Changes made are shown in the graphic display. It can be retrofitted to existing alre wireless installations (except wireless room temperature sensors with FTRFBu and FTRFUd clock).
−20 … +70 °C
max. 95% relative humidity, non-condensing
Protection rating: Safety and EMC:
IP 30
according to DIN EN 60730 and DIN EN 300220
Radio frequency:
868.3 MHz
Range:
150 m line-of-sight or up to 30 m in buildings, depending on the construction
Type/image
Item no.
Features
PG
MGCBB-064.360
BA210101
Wireless room temperature management system, controlled remotely via the Internet Design: Berlin 2000 Surface finish: matt Housing colour: pure white, like RAL 9010 Housing material: ABS plastic Operating voltage: +5 VDC Mounting/attachment: Direct surface/wall-mounting by means of screws Protection class: III Operating elements: confirmation button Scope of delivery: b@home gate, network cable (CAT5)/cable length 3 m, MicroUSB power supply plug/cable length 1.8 m Wireless room temperature sensor to detect and set the room temperature, control unit for additional active channels, sensor/contact input for central control of the b@home gate General features: Time/temperature display; automatic/comfort/ECO operating mode display; external input for ECO contact or OFF contact or external room sensor or flow sensor for H/C changeover or H/C changeover contact or dew point sensor; automatic adjustment to summer/winter time; power reserve (ap- prox. 3 days); backlight; measured value correction; child lock; operation using
I
FTRCUd 210.021#21
UA070000
I
direct-dial buttons. Design: Berlin UP Surface finish: glossy Housing colour: pure white, similar to RAL 9010 Housing material: Plastic ABS, PC, PMMA Operating voltage: 230 V AC, 50 Hz Electrical connection: pluggable screw terminals
Mounting/attachment: in flush-mounted socket (deep flush-mounted socket recommended); can be adapted to fit virtually any surface switch range, see adaptation list on page 27 Protection class: II, if properly mounted Average power consumption: <1 W Sensors: Internal NTC, optional external (“Sensor 2”) Control range: 5 … 30 °C Transmission interval: Approx. 3 min and after setpoint change Display type: backlit graphic display Display: set/actual temperature, date, time; set/actual temperature or date, time Scope of delivery: wireless sensor, cover 50 x 50 mm pure white (similar to RAL 9010), glossy, alre frame “Berlin”
only compatible with b@home system
Catalogue 2022 | Page 20
Made with FlippingBook Digital Publishing Software