Outdoor temperature sensors AFH with passive output AFH … outdoor temperature sensor with sleeve lead-out Technical data
Application
Housing colour: Housing material:
pure white, like RAL 9010
The outdoor temperature sensors are used for temperature measurement in the outdoors, in damp room appli- cations, in cold storage rooms and greenhouses as well as in industrial applications and are specially protected against dust and moisture. Owing to the external sensor sleeve, this outdoor sensor has a very good actuation response to temperature changes. If there is direct incident sunlight on the sensor, the use of a sun shade is recommended.
PA plastic (30% GF reinforced)
Operating voltage (active): 24 VDC Ambient temperature:
−30 … +70 °C
Permissible atmospheric humidity: Max. measurement cur- rent (passive): Electrical connection:
max. 95% rel. humidity, non-condensing
< 1 mA
screw-type terminals 0.14 mm² to 2.5 mm² only to safety extra low voltage, max. passive output: 30 VAC/42 VDC depending on the cross-section of the conductor and the sensor unit type PT100/PT1000 DIN EN 60751 B
Sensor wire extendable:
Tolerances:
Mounting/attachment:
surface/wall mounting
Protection rating: Protection class: Safety and EMC:
IP 65
III
according to DIN EN 60730
Please follow the EMC directives, avoid parallel routing with mains voltage-bearing wires, or use shielded wires.
Sensor
Type (passive)
Item no.
PG
PT 100
AFHP 100
G9040160
III
PT 1000
AFHP 1000
G9040170
III
NTC 10 K “Sensor 4”
AFHC 10
G9040220
III
Dimension drawing
Catalogue 2022 | Page 208
Made with FlippingBook Digital Publishing Software