Pendulum temperature sensor PF
Technical data
Application
Sensor material:
Al black, PVC wire
The pendulum temperature sensor PF serves to measure the tem- peratures in larger spaces. Owing to the spherical form, this sensor captures the temperature from all directions of the room, so that when correctly positioned in the room, a representative measure- ment result can be achieved.
Sensor dimensions: Ambient temperature: Permissible atmospheric humidity:
Ø 60 mm
−30 … +80 °C
max. 95% rel. humidity, non-condensing
Max. measurement current: < 1 mA Electrical connection:
only to safety extra low voltage max. 30 VAC/42 VDC depending on the cross-section of the conductor and the sensor unit type
Sensor wire extendable:
Connecting cable:
2 x 0.5 mm² suspended
Mounting/attachment:
Tolerances:
PT100/PT1000 DIN EN 60751 B NI1000 DIN EN 43760 B
Protection rating: Protection class: Safety and EMC:
IP 65
III
according to DIN EN 60730
Sensor characteristic curves:
the sensor characteristic curves can be found in the “Miscellaneous” section
Please follow the EMC directives, avoid parallel routing with mains voltage-bearing wires, or use shielded wires.
Sensor
Type
Item no.
Features
PG
PT 100
PFP 100
G9130010
Wire length: 1 m
III
PFP 1000
PT 1000
G9130020
Wire length: 1 m
III
PFC 10
“Sensor 4” NTC 10 K
G9130070
Wire length: 1 m
III
“Sensor 2” NTC 47 K
PFC 47/6 (6 m)
G9130180
Wire length: 6 m
III
PF dimension drawing
Catalogue 2022 | Page 212
Made with FlippingBook Digital Publishing Software