Electronic floor or surface temperature controller with remote sensor (for floor heating / wall and ceiling heating / tiled stove) HTRRB Surface-mounted installation – Design Berlin 2000
Technical data
Application
Design:
Berlin 2000
Temperature control (e.g., of electrical heating systems) for floor, fringe zone, bathroom, ceiling, tiled stove, marble and wall heating systems or tempering systems. Note: The sensor line must be routed in a protective duct. Parallel routing together with lines that carry alternat- ing currents is not admissible. Floor temperature controller with clock: HTRRBu-110.021 Floor temperature controller for distributor assembly: ITR 79 Series (plant engineering)
Surface finish: Housing colour: Housing material: Operating voltage:
matt
pure white, like RAL 9010
ABS plastic
230 VAC, 50 Hz
Ambient temperature: Storage temperature: Permissible atmospheric humidity: Electrical connection: Mounting/attachment:
0 … 30 °C
−20 … +70 °C
Max. 95% rel. humidity, non-con- densing
screw-type terminals
Surface/wall mounting (4-hole as- sembly on flush-mounted socket)
Protection rating: Protection class: Safety and EMC:
IP 30
II, if properly mounted
according to DIN EN 60730
Max. switching current: Max. switching voltage: Min. switching voltage:
13 (2) A
230 VAC, 50 Hz 230 VAC, 50 Hz
Switching power: Switching element: Switching contact:
3000 W
relay
NO contact
Output signal:
230 VAC, 50 Hz external, NTC
Sensor:
Sensor rupture and short-circuit protection:
heating is switched off
Control function:
heating
Hysteresis:
approx. 1 K
General features:
“Heating” display: mechanical range limitation; 3000 W switching power for electric direct heating systems, natural stone heating; “on/off” switch; external setting
Type/image
Item no.
Features
Circuit diagram
PG
HTRRB-011.010
General features: Floor temperature controller with remote sensor HF-8 / 4-K2 4 m, multi-digit display 1 … 6 Control range: 10 … 60 °C Note: The setting range can be adjusted to 10…40 °C (for example) using the mechanical range limitation as a replacement for the type HTRRB-010.310 . General features: Tiled stove surface temperature controller with remote sensor HF-5 / 4-K3 4 m; scale: Degrees Celsius; threshold arrow Control range: 20 … 80 °C
DA400000
I
HTRRB-011.410
DA400100
I
Catalogue 2022 | Page 98
Made with FlippingBook Digital Publishing Software