IN THE PORT SEQUENCE VALVES NEW
Simplify Your Circuit
SAVE TIME and MONEY Sequence at the Device > NOT THE CIRCUIT<
ONE CIRCUIT SAVES YOU DESIGN TIME & PRODUCTION COSTS INDIVIDUAL DEVICE TIMING Let’s you adjust each device as needed for optimized part holding. FOR ALL VEKTEK PORT READY DEVICES 1 2 3
NEW WAY 1 Circuit
OLD WAY 3 Circuits
Installs directly into device port, requires manifold feed. Works with Top Flange, Bottom Flange Swing Clamps, Link Clamps and New High Capacity Work Supports. Controls timing of individual devices on your fixture. Each valve can be individually adjusted from the factory preset. True sequencing design allows full system pressure downstream of valve after opening. Maintains pressure upstream while device actuates. Three pressure ranges available with adjustability within each range. Can be added after the fixture is built to assure proper sequencing. Requires manifold mounted device. Use with single or double acting clamps; in clamp port, unclamp port, or both. Internal reverse free flow check valve allows for faster return. Accessories available; Pressure pre-set block, in-line adapter block and manifold mount block.
Patent Pending
Model No.
Factory Preset Pressure (psi)
Set Pressure Range
Port Size X Depth A B SAE 4 X 0.58 1.07 .77
PORT DEPTH
A MAX
5/32 HEX
70-4437-10 70-4437-11 70-4437-12 70-4437-20 70-4437-21 70-4437-22
750
300-875
.62
1,500 3,000
500-2,500 SAE 4 X 0.58 1.07 .77 2,000-4,000 SAE 4 X 0.58 1.22 .92
.56
750
300-875
SAE 4 X 0.75 1.07 .77
PORT SIZE
.22
.69
B
ILS702005 REV C
1,500 3,000
500-2,500 SAE 4 X 0.75 1.07 .77 2,000-4,000 SAE 4 X 0.75 1.22 .92
Made with FlippingBook - Online Brochure Maker