Now up to 3X competitive capacity at 5,000 PSI! Plungers stay retracted during part loading.Hydraulic pressure advances the plunger exerting only spring force as it makes contact with the part. Hydraulic pressure then automatically sequences, “freezing” the plunger, to properly support the part. Available in 1000, 2000, 4000 & 8000 lb. capacity. Order with base or cartridge only. Ventless configuration and built in wipers protect the plunger movement from chips and debris. Four bolt base is compatible with Vektek In-Port flow control and In-Port sequence valves. Uses Vektek’s BHC technology to guard against corrosion. n O-ring face seal design makes machining cavities easier. NEW World’s Smallest Work Supports!
TUFFGRIP™ WORK SUPPORTS HIGH CAPACITY
Patent Pending
3/4” Threaded Body
Actual Size 1,000 lbs Capacity
Standard SAE porting and alternate o-ring manifold face seal is located in the base of the support for bolt down installation. The base can be removed for direct cartridge mounting.
ILS100718 REV C
Contact Force (lbs)
Base Dimensions (in.)
Retracted Height (in.)
Working Oil Capacity (cu. in.) **
Port X Depth for Optional In-Port Valves****
Model No.
Support Capacity (lbs)*
Mounting Style***
Stroke (in.)
Fluid Advance Work Supports, hydraulic pressure pushes a spring which lifts plunger, hydraulic pressure locks in place. 10-0704-10 1000 Cartridge 0.5-4 0.25 N/A 1.63 0.03
N/A
10-0804-20 10-0706-10 10-0806-20 10-0706-16 10-0806-26 10-0708-10 10-0808-20 10-0708-16 10-0808-26 10-0710-10 10-0810-20
SAE/Manifold
1 X 1 X 1
2.25 2.14 2.79 2.64 3.29 2.85 3.50 3.35 4.00 4.00 4.63
SAE 4 X 0.58
Cartridge
N/A
N/A
0.25
0.05
SAE/Manifold
1.19 X 1.31 X 1.31
SAE 4 X 0.58
2000
1-6
Cartridge
N/A
N/A
0.50
0.07
SAE/Manifold
1.19 X 1.31 X 1.31
SAE 4 X 0.58
Cartridge
N/A
N/A
0.25
0.20
SAE/Manifold
1.50 X 1.63 X 1.63
SAE 4 X 0.58
4000
3-10
Cartridge
N/A
N/A
0.50
0.23
SAE/Manifold
1.50 X 1.63 X 1.63
SAE 4 X 0.58
Cartridge
N/A
N/A
8000
4-13
0.625
0.57
SAE/Manifold
1.63 X 2.13 X 2.13
SAE 4 X 0.75
* Support capacities are listed at 5,000 psi maximum pressure. Support capacities for other pressures are shown in the fluid advance High Capacity and Part Present Sensing load capacity chart ** Restrict flow rate to a maximum of 130 cu. in./minute. *** For cartridge mount models, see cavity dimensions drawings in this catalog section. **** In-Port Valves require the use of manifold mount ports. NOTE: The maximum system back-pressure a fluid advance work support can overcome is 10 psi. Returning back-pressure greater than 10 psi may cause slow or failed retractation.
Request Your High Capacity Work Support Brochure!
Made with FlippingBook - Online Brochure Maker