ADVANCED WORKHOLDING
PUMP SELECTION
3
To select the Advanced Workholding Pump that best fits your needs follow these seven selection points: 1. Type of system to be powered - Live System or Pallet Decoupled 2. Single or Double Acting System 3. Control Interface How do you want to control your pump? • Manual Valve • Pendant
CONTROL INTERFACE
Manual Valve 2-Position/3-Port or 3-Position/4-Port manual control. Controller Pendant All Advanced Workholding pumps come with a pendant. They can be used to control the pump with simple systems or as a temporary control when setting up a larger system. 2 Hand No-Tie-Down A Two-Hand No-Tie-Down Control is a device which requires an operator to have both hands on the control in order to activate a cylinder. This safety device gives a maintained output signal when both buttons are pressed and held.
• 2 Hand No-Tie-Down • Machine Tool Control 4. Number of Valves (Up to 6 circuits) 5. Electrical Source 6. 1hp or 2 hp pump 7. Options For assistance call: 800-992-0236 email: customersupport@vektek.com
MACHINE TOOL CONTROL
Interface with CNC Machine controller. Pump/Machine Tool Interface Cable, 1-6 Valves, 24 Pin or 36 Pin.
1 2
4
VALVING
NUMBER OF CIRCUTS
MANUAL 2-POSITION/3-PORT
1 1 2 4 1 2 4 1 2 4
SINGLE ACTING FIXTURE
LIVE SYSTEM
24 VDC 2-POSITON/3-PORT NORMALLY OPEN
Direct Connect or Rotary Union
MANUAL 3-POSITION/4 -PORT CLOSED CENTER
DOUBLE ACTING FIXTURE
24 VDC 3-POSITON/4-PORT CLOSED CENTER
MANUAL 2-POSITION/3-PORT 1 24VDC 2-POSITION/3-PORT NORMALLY CLOSED “DUMP PUMP” 1 1 24VDC 2-POSITION/3 PORT NORMALLY CLOSED
(ONE HOSE) SINGLE ACTING FIXTURE
2 4 1
PALLET DECOUPLED
MANUAL 3-POSITION/4-PORT P-BLOCKED
(TWO HOSES) SINGLE OR DOUBLE ACTING FIXTURE Includes all Auto Shutoff Decoupler handles
24VDC 3-POSITION/4-PORT P-BLOCKED CENTER WITH A & B INDIVIDUAL CIRCUIT PRESSURE ADJUSTMENT
1
1 2 4
24VDC 3-POSITION 4-PORT P-BLOCKED
2 PORT PUMP - BASIC
MANIFOLD ONLY (NO CONTROL VALVES INCLUDED)
0
Made with FlippingBook - Online Brochure Maker