Standard 1-4 Valve Machine Tool Interface Control (without power)
INTERFACE Machine Tool Interface Control Operated Pump Complete integration of the pump and valve control to the CNC machine can be accomplished with 1 of 3 options, all using the Harting Series Han 10B connector system in a single 16 ft (5M) cable. The Harting Series Han 10B connector utilizes A, B, or C modules with 12 pins each to connect valve control, pressure switch monitoring, and pump status monitoring. In the standard 1-4 valve or 5-6 valve system, power for the pump motor is supplied in a separate service cable. In the optimized 1-4 valve system, power for the pump motor is included in the C module of the single machine tool interface cable (5-6 valve not possible). Each system is supplied with a mating female cable receptacle with a 16 ft (5M) pig tail to be mounted and connected to the machine tool controller or PLC (Programmable Logic Controllers). The pump is supplied with a mating male cable receptacle that is already prewired to the pump enclosure for complete control. Input pump status monitoring for each configuration includes oil level, oil temperature, oil filter clog indicator, and VFD fault status. Output from PLC to the pump includes emergency stop and fault rest. This allows for complete control and monitoring of the pump system in all configurations. All Machine Tool Interface Control options must be configured at the time of order and built at the factory. These options cannot be added or upgraded in the field.
Optimized 1-4 Valve Machine Tool Interface Control (with Power)
Standard 5-6 Valve Machine Tool Interface Control (without power)
Machine Tool Mounted Optional Interface
Currently available to interface with Okuma machines. Other interfaces available upon request. Ask your machine tool supplier for interface options for your machine.
OKUMA is a Tradmark of OKUMA AMERICA CORPORATION
Made with FlippingBook - Online Brochure Maker