ECX FLAT 42 S ∅ 42 mm, bürstenlos, BLDC motor Eckdaten: 40/58.4 W, 63.5 mNm, 10 000 min-¹
M 1:1
Motordaten Nennspannung Leerlaufdrehzahl Leerlaufstrom Nenndrehzahl Nennmoment Anhaltemoment1 Anlaufstrom
1_ 2_ 3_ 4_ 5_ 6_ 7_ 8_ 9_
V
24
48
min-¹ mA min-¹ mNm mNm A A
8700 174 6290 59.8 2.17 217 23.7 77.5 1.01 0.802 25.7 372 14.7 13.5 87.5
8970 91.4 6540 63.5 1.18 236 14.7 78.6 3.26 3.02 49.8 192 12.6 11.5 87.5
Nennstrom (max. Dauerbelastungsstrom)
Max. Wirkungsgrad Anschlusswiderstand Anschlussinduktivität Drehmomentkonstante Drehzahlkonstante Kennliniensteigung Rotorträgheitsmoment Mechanische Anlaufzeitkonstante
% Ω
10_ 11_ 12_ 13_ 14_ 15_ 16_ 17_ 18_ 19_ 20_ 21_ 22_ 23_ 24_ 25_ 26_ 27_ 28_ 29_ 30_ 31_
mH
mNm/A min-¹/V min-¹/mNm
ms gcm2
Thermische Daten
Betriebsbereiche n [min-¹] Wicklung 24 V
Therm. Widerstand Gehäuse-Luft Therm. Widerstand Wicklung-Gehäuse Therm. Zeitkonstante der Wicklung Therm. Zeitkonstante des Motors Umgebungstemperatur Max. Wicklungstemperatur Mechanische Daten Kugellager Grenzdrehzahl
K/W K/W
2.83 5.82 19.9 157 -40…+100 125 10 000
s s
0 2000 4000 6000 8000 10000
°C °C
min-¹
< 6 N 0 mm > 6 N 0.14 mm
Axialspiel bei Axiallast Kraftrichtung
Dauerbetriebsbereich Dauerbetriebsbereich bei reduziertem therm. Widerstand R th2 50% Kurzzeitbetriebsbereich
Zug
Radialspiel
vorgespannt
Max. axiale Belastung (dynamisch) Max. axiale Aufpresskraft (statisch) Max. radiale Belastung [mm ab Flansch] (Welle abgestützt)
N N N N
6 86 1300 35 [5]
10
20 40 50 70 30 60
0
M [mNm]
366_GPX 42 C 366_GPX 42 UP 392_GSW 40 HP 393_GSW 55 A Baukastensystem Getriebe
Details auf Katalogseite 52
Weitere Spezifikationen Polpaarzahl
Sensoren
443_DEC Module 24/2 443_DEC Module 50/5 447_ESCON2 Nano 24/2 447_ESCON2 Micro 60/5 Steuerungselektronik
Stufen [opt.]
8 3 112
1–4 1–4
408_ENX 42 MILE
Anzahl Phasen Motorgewicht
g
449_ESCON2 Compact 60/2 449_ESCON2 Compact 60/5 454_EPOS4 Micro 24/5 CAN 454_EPOS4 Micro 24/5 EtherCAT 455_EPOS4 Module 50/5 457_Compact 24/5 EtherCAT 3-axes 458_EPOS4 Compact 50/5 461_EPOS4 50/5
Anschlüsse, Motor (Kabel AWG 18) Pin 1 Motorwicklung 1 Pin 2 Motorwicklung 2 Pin 3 Motorwicklung 3 Pin 4 N.C. Stecker, Artikelnummer Molex, 39-01-2040 Anschlüsse, Sensoren (Kabel AWG 28) Pin 1 Hall-Sensor 1 Pin 2 Hall-Sensor 2 Pin 3 Hall-Sensor 3 Pin 4 GND Pin 5 V Hall 2.7…24 VDC Pin 6 N.C. Stecker, Artikelnummer Molex, 43025-0600 Schaltbild für Hall-Sensoren siehe S. 73. 1gerechnet ohne Sättigungseffekt (S. 93/129)
Konfiguration
Flansch: Standardflansch Welle vorne: Länge/Absatz/Flächen Welle hinten: Länge/Absatz
maxon 223
© 2026 maxon. Alle Rechte vorbehalten. Ausgabe April. Daten provisorisch. Änderungen vorbehalten.
Made with FlippingBook Publishing Software