Joinery festoolusa.com 161
160
Joinery
DOMINO ® Accessories Extend the range of the Domino® joining system with attachments that deliver precise repeatability, consistent spacing, secure and accurate centering, and more. Since applications range from small to large, a full assortment of tenon types and sizes are also available, with color-coded cutters to match.
DF 500 Q Accessories
DF 700 EQ Accessories
Cross Stop For repeat hole spacing between 3-7/8” and 8-1/16” (100 mm and 205 mm). The Cross Stop enables precise and repeatable mortise placement across the surface or edge of a workpiece. Increase efficiency by eliminating the need for witness or scribe marks. Adjustable-spaced pins register against the starting edge of the material or in the previous mortise for accurate and consistent spacing of mortises. Trim Stop For narrow material between 7/8” and 2-3/4” (22 mm and 70 mm) in width. The Domino Trim Stop enables precise and repeatable mortise placement in ends of narrow workpieces, such as rails or spindles. Sides adjust independently for centered or off-center mortising. Hand rail fence For centering on round stock between 1-3/8” and 2-3/8” (35 mm and 60 mm) in diameter. The Domino Handrail Fence aligns mortises in round workpieces, such as handrails. Attaches quickly and easily to the Domino Joiner without the need for tools. Support Bracket Easily balance the fence of the Domino Joiner on narrow stock or when used in vertical plunging for increased accuracy in placement of mortises. Integrated flip stops provide reference points at 20mm from the edge.
Cross Stop For repeat hole spacing between 3-7/8” and 8-1/16” (100 mm and 205 mm). The Cross Stop enables precise and repeatable mortise placement across the surface or edge of a workpiece. Increase efficiency by eliminating the need for witness or scribe marks. Adjustable-spaced pins register against the starting edge of the material or in the previous mortise for accurate and consistent spacing of mortises. Trim Stop For narrow material between 7/8” and 2-3/4” (22 mm and 70 mm) in width. The Domino Trim Stop enables precise and repeatable mortise placement in ends of narrow workpieces, such as rails or spindles. Sides adjust independently for centered or off-center mortising. Hand rail fence For centering on round stock between 1-3/8” and 2-3/8” (35 mm and 60 mm) in diameter. The Domino Handrail Fence aligns mortises in round workpieces, such as handrails. Attaches quickly and easily to the Domino Joiner without the need for tools. Support Bracket Easily balance the fence of the Domino Joiner on narrow stock or when used in vertical plunging for increased accuracy in placement of mortises.
$87.00 498590
$87.00 498590
$87.00 493487
$87.00 493487
$87.00 494847
$87.00 494847
$40.00 495666
$40.00 495666
DOMINO Cutter D 8-NL 50 HW
$72.00 497868
DOMINO Cutter D 4-NL 11 HW
$49.00 495663
DOMINO Cutter D 10-NL 70 HW
$74.00 497869
DOMINO Cutter D 5-NL 20 HW
$53.00 493490
DOMINO Cutter D 12-NL 70 HW
$76.00 497870
DOMINO Cutter D 6-NL 28 HW
$52.00 493491
DOMINO Cutter D 14-NL 70 HW
$81.00 497871
DOMINO Cutter D 8-NL 28 HW
$53.00 493492
DOMINO Cutter D 10-NL 28 HW
$54.00 493493
Cross Stop Eliminate witness marks and guesswork.
Support Bracket Get straight, consistent mortises.
Trim Stop Achieve precise, repeatable mortises.
Handrail Fence Precisely join round stock.
Made with FlippingBook - Online catalogs