Sawing festoolusa.com 87
86
Sawing
Track Saw and Guide Rail Accessories
TSC 55 KEB - 6-1/4” (160 mm) (Cont.) Rapid Charger TCL 6
TS 60 K plunge-cut saw Parallel Side Fence for TS 60 K; Parallel guide, guided on both sides; Can also be used as table extension Splinter guard for TS 60 K; Can be used with or without guide rail; For low-splinter cuts to the right of the saw blade; Package contents: 5 Units Cover Plate for TS 55, TS 55 R, TS 55 F, TS 60 K, TSC 55, TSC 55 K; Cover for improved dust extraction; Can also be used as false joint set For Li-ion battery packs (except for CXS/TXS). LED display shows the remaining battery life and charge status. Space-saving with a secure cord holder. TCL 6 DUO Rapid Charger For all Li-ion battery packs (except for CXS/TXS); for charging two Li-ion battery packs at the same time Rapid Charger SCA 8 Faster re-charge for less down time. AIRSTREAM batteries with the SCA 8 charger re-charge 60% faster than previous charging technology. Energy Set SYS 18V 2x5,0/TCL 6 DUO for all applications and most 18-volt devices – with a focus on power and endurance (not compatible with the sanders ETSC 125, RTSC 400, DTSC 400 and the dust extractor CTC SYS); ideal addition to the Festool Basic cordless tools or as additional battery packs for the workshop or job site; including: 2 x BP 18 Li 5,0 ASI battery pack; TCL 6 DUO rapid charger; Systainer SYS3 M 187 Energy Set SYS 18V 2x4,0/TCL 6 DUO for all applications and most 18-volt devices – when the focus is on compact design (not compatible with ETSC 125, RTSC 400, & DTSC 400 cordless sanders); ideal addition to the Festool Basic cordless tools or as additional battery packs for the workshop or job site; including: 2 x BP 18 Li 4,0 HPC-ASI battery pack; TCL 6 DUO rapid charger; Systainer SYS3 M 187
TS 55 FEBQ - 6-1/4” (160 mm) Splinter guard (5 pieces) TS 55 FEBQ and REQ Flush-mount Splinterguard protects material surface for both straight and bevel cuts. Limit Stop Set stop points on the Guide Rail for repeat cuts and plunge-cuts. Infinitely adjustable placement along the entire rail. Reduces the risk of kickback when initiating plunge-cuts. Parallel Side Fence Create parallel cuts from an edge. Can be used on both sides of the saw. Flip it over and it becomes an extension table. Rip capacity from the blade side to 11-13/16” (300 mm) and on the motor side to 3-3/4” (95 mm). Cover Plate Encloses blade housing for improved dust extraction when cutting vertically or overhead. Can also be used for creating architectural false joints. Dust Bag Keep the work space clean by virtually collecting all dust. When not in use bag folds down for space-saving transportation and storage. Includes a dust cap.
$79.00
201138
499011
$28.00
$129.00 577018
NEW
491582
$16.00
$105.00 200313
$299.00 577079
491469
$82.00
NEW
577341
$77.00
$285.00 577108
NEW
500393
$49.00
577274
$82.00
577288
$28.00
TSC 55 KEB - 6-1/4” (160 mm) Splinter guard (5 pieces)
NEW
577341
$77.00
499011
$28.00
TSC 55 KEB Flush-mount Splinterguard protects material surface for both straight and bevel cuts.
NEW
Limit Stop Set stop points on the Guide Rail for repeat cuts and plunge-cuts. Infinitely adjustable placement along the entire rail. Reduces the risk of kickback when initiating plunge-cuts. Parallel Side Fence Create parallel cuts from an edge. Can be used on both sides of the saw. Flip it over and it becomes an extension table. Rip capacity from the blade side to 11-13/16” (300 mm) and on the motor side to 3-3/4” (95 mm).
491582
$16.00
TSV 60 K plunge-cut saw
Scoring saw blade for veneered and coated panels; splinter-free cut on both sides
577082
$89.00
491469
$82.00
NEW
Cover Plate Encloses blade housing for improved dust extraction when cutting vertically or overhead. Can also be used for creating architectural false joints.
577341
$77.00
TS 75 EQ - 8-1/4” (210 mm) TS 75 Splinter guard (5 pieces) TS 75 EQ Splinter-free cross cuts in a single pass thanks to the off-cut side Splinterguard and integrated Guide Rail Splinterguard. Limit Stop Set stop points on the Guide Rail for repeat cuts and plunge-cuts. Infinitely adjustable placement along the entire rail. Reduces the risk of kickback when initiating plunge-cuts. Parallel Side Fence Create parallel cuts from an edge. Can be used on both sides of the saw. Flip it over and it becomes an extension table. Rip capacity from the blade side to 11-13/16” (300 mm) and on the motor side to 3-3/4” (95 mm).
491473
$28.00
Dust Bag Keep the work space clean by virtually collecting all dust. When not in use bag folds down for space-saving transportation and storage. Includes a dust cap. Battery Pack BP 18 Li 5.0 ASI Powerful 5.0 Ah battery for endurance and power. The all- rounder for all applications. Integrated LED display on the battery pack provides charge status at all times. Bluetooth® enables the compatible CLEANTEC mobile dust extractor to be started automatically when the cordless tool is activated.
500393
$49.00
491582
$16.00
$135.00 577661
492243
$82.00
Made with FlippingBook - Online catalogs