RedKap WorkWear

9

2

11

3 19

7

12

8

8

13

4a 4b

10

14

5

1

15

18

16

6

17

of the hips. Hold the tape measure straight and level. 5 HIPS

Stand straight against a wall without your shoes. Make a mark level with the top of your head. Measure from this point down to the floor. 1 HEIGHT

Stand with your heels together. Measure around the fullest part

NECK 2

6 INSEAM

Measure around the base of the neck where a collared shirt would fit , or measure a collar band on a shirt that fits you well.

Standing straight, measure the distance from the crotch to just below the ankle bone. OR - using similar style pants that fit you well: lay garment flat with front and back creases and smooth. Measure along the inside seam of one leg from the bottom of the hem to the crotch.

CHEST / BUST

Measure the fullest part of your chest/bust . Hold the tape firmly, but not tightly. Be sure the tape is level and straight across your back. Stand naturally.

3

7 SLEEVE

Bend the elbow slightly. Start at the center back of the neck and measure across the shoulder to the elbow and down to the wrist bone.

WAIST / MID-SECTION 4a

First, remove your belt. Then, measure over shirt (not over pants) at 1/2" to 1" below the navel. Hold the tape firmly but not tightly. If pants are worn under a protruding abdomen, measure where pants are typically worn. Note: For women, please refer to the hip measurement as the key point of measure for fitting pants.

up to the bottom of the collar. (For coveralls only) 8 TRUNK

Measure from base of neck (front) down around crotch and back

WAIST / MID-SECTION 4b

approximately 1/8" above the ears. 9 CAP / HAT SIZE

Measure the circumference of the head at it’s widest diameter,

For shirts and covering garments such as coveralls - measure midsection over clothing around the fullest part of the abdomen. Note: Include both “A” and “B” measurements if ordering multiple garments.

170

Made with FlippingBook - Online magazine maker