2,9
H H1
F100-2IOL
Inductive Coupling System
■ Stationary unit - Base ■ Mobile unit - Remote
Axial coupler
Base / Remote:
Base / Remote:
Base:
Remote:
C
12,9
C
10,5
12,9
12,9
2,8
2,9
H H1
2,9
H H1
2,9
H H1
C
C
10,5
X1, X2
X1, X2
2,8
C
C
2
2
C
10,5
C
10,5
3
1
2,8 1
5
5 3
2,8
4
4
2x Male connector 5-pin M12 x 1
2x Female connector 5-pin M12 x 1
Subject to technical changes. For more detailed information please ask our customer service.
Inductive coupling system F100-2IOL
Base
Remote
Type Id. No.
0E012330
0E012331
A B C H
mm mm mm mm mm
100
50
1
25
H1
3
ɑ ß γ
35 20
degree degree degree
45.5 Al, GFK IP67
Housing material Protection class Function LED IO-Link Base (X1, X2) LED Power Color Yellow / red
Function LED IO-Link Remote (X1, X2) LED Power Color Yellow / red
Yellow » SIO mode active and SIO signal is high
Yellow » SIO mode active and SIO signal is high
Flash yellow (1000 ms on, 100 ms off), » IO-Link communica- tion active, power is on, Remote was detected Flashing 2 Hz yellow » no IO-Link device detected, power on, no Remote detected Flashing 2 Hz red » Short circuit on IO-Link PIN Flashing 5 Hz red » Overload voltage output Remote
Flash yellow (1000 ms on, 100 ms off),» IO-Link communica- tion active, power is on, Base has been detected Flashing 2 Hz yellow » No IO-Link communication, power on, no Base detected
Function
Function
Flashing 2 Hz red » Short circuit on IO-Link PIN Flashing 5 Hz red » Overload voltage output Base
PIN assignment Supply voltage Data-Valid Ground IO-Link Signal -
24 V IN X1 Base DAV 24 V
24 V IN X2 Base
X1 Remote
X2 Remote
PIN 1
24 V OUT
24 V OUT
2 3 4 5
-
-
-
GND
GND
GND
GND
IO-Link CQ
IO-Link CQ
IO-Link CQ
IO-Link CQ
-
-
-
-
SMW-electronics 13
Made with FlippingBook Publishing Software