SMW-electronics_Broschüre_EN

M30-2

Inductive Coupling System

Application/customer benefits • Contact free, safe transmission of energy and signals between moving / rotating and stationary components • Application examples: Supply of sensors, supply and monitoring of remote systems, contactless battery charge (W-Charge), monitoring of door contacting, valve control, plug replacement • Dynamic Pairing • Wear and maintenance free • Protective functions: Temperature monitoring, foreign object detection, reverse polarity protection • Multi-level LED with good visibility Technical features • Mounting M30 x 1.5 • Operating voltage 24 V (18 ... 30 V) • Transmission distance 0 - 8 mm ■ Contact free transmission of energy and signals

Axial coupler

• Transmission of energy: 24 V / 12 W (500 mA) • Transmission of signals: 2 digital signals (PNP) • Connection: Remote female connector M12x1 (5-pin), base male connector M12x1 (4-pin) • Protection class IP 67 • Id. No. Base: 0E011600, Id. No. Remote: 0E011601

Block diagram:

PLC

24 V/12 W

Energy

2 digital signals

0 - 8 mm

Base

Remote

Signals

Subject to technical changes. For more detailed information please ask our customer service.

Function Base LED Power Color

Function Remote LED Coupling Color

Green / red

Green / red

Off » Unit not supplied with voltage (or undervoltage) On (green) » 24 V ok and remote unit has been detected Flashes 2 Hz green » 24 V ok but no remote unit detected Flashes 1 Hz green / red » Incompatible remote unit detected Flashes 2 Hz red » Foreign object detected Flashes 5 Hz red » Internal error

Off » Unit is not connected On (green) » Unit is connected, voltage output DC 24 V ok Flashes 2 Hz red » Unit is connected but short circuit at DC 24 V Flashes 5 Hz red » Internal error

Function

Function

LED Signal 1 Color

Yellow

LED Signal 1 Color

Off » Digital input 1 is not connected On » Digital input 1 is connected

Function

Yellow

LED Signal 2 Color

Off » Digital input 1 is not connected or no remote unit detected On » Digital input 1 is connected Flashes 2 Hz » Digital input connected but short circuit at the output Flashes 5 Hz » Overload voltage output remote unit

Yellow

Off » Digital input 2 is not connected On » Digital input 2 is connected

Function

Function

LED Signal 2 Color

Yellow

Out » Digital input 2 is not connected or no remote unit detected On » Digital input 2 is connected Flashes 2 Hz » Digital input connected but short circuit at the output Flashes 5 Hz » Overload voltage output remote unit

Function

30 SMW-electronics

Made with FlippingBook Publishing Software