LPS 4.0 IO Linear Position Sensor System High-precision inductive linear position sensor
Standard connection M12 x 1 (5 Pole)
Common communication interfaces: ■ IO-Link ■ Analog signal: (0 -10 V/4 -20 mA)
Status displays LEDs Operation and Target detection
Inductive position measurement by target / encoder unit
Sensor
Housing plastic Protection class: IP67 / 69K
Operating distance
Target/ encoder unit
Required dimensions: LPS 4.0 48/80/120 IO TARGET / ENCODER UNIT DESIGN
Dimensions
Remark
A = Required distance (light and parallel) between measuring surface and the operating ring
Operating distance A = 1.0 mm ± 0.25
Width B = 19 mm
B = Required width of the operating cam or operating ring
Angle α = 6°
α = Angle min. 6°
Ring
Cam
α
A
B
B
α
Example:Target / encoder unit (cam geometry)
Example:Target / encoder unit (ring geometry)
58 SMW-electronics
Made with FlippingBook Publishing Software