RELIANCE Horizontal Lifeline Systems
Reliance TunedCable™ Systems
Reliance Horizontal Lifeline Systems use TunedCable ™ technology. Cable tuning (or the use of high pre-tensioned cables) has been shown to significantly reduce fall arrest distances and line tensions during fall arrest. This is accomplished using a scientifically tuned HLL cable that reduces the input momentum of a falling weight and at the same time forces the cable to absorb the energy generated during a fall at a higher rate. This allows the design of systems with longer line lengths and lower final line tensions than previously thought possible. This also creates the need for fewer bypass supports to reduce line tension, thus lower overall system cost. TunedCable ™ technology permits: • Free spans up to 200’ (61m) without intermediate supports • Lower end loads, which means easier installations in more and different locations • Multiple end-anchor choices for every situation: rebar clamps, concrete beam straps, anchors, concrete inserts, weld-on lugs, bolt-on clamps, I-Beam clamps and more • A choice of stanchions to raise the lifeline above the walkway or with in-line clamps where overhead structure exists • All systems are available with bypass supports to reduce line tension and limit fall distances Reliance systems are engineered, and comply with all applicable OSHA and ANSI requirements and standards. They are supplied with complete documentation so they will meet the requirements for anchorage performance, design and component traceability for OHSA inspections - and at a reasonable price.
HIGHER STANDARDS IN FALL PROTECTION
• goSafe & go home • • Your Partner In Safety Since 1979 • 1
800-330-9240 • goSafe.com
Made with FlippingBook - professional solution for displaying marketing and sales documents online