Step 1 . Insert the big wooden trophy piece into the hole of the footstand. You will notice that the hole in the footstand is more to the back, making the front area wider. This is so that the Sublimer can go on the front in the end (the hole is intended not to be in the middle).
Step 2. Now you can glue the trophy that is inserted into the stand, onto the second part of the stand, like this:
Step 3.
• Before pressing the 2Tone Sublimer, make sure you press it the correct way around. • Test the Sublimer on the trophy first, by inserting the mechanism at the back of the unprinted Sublimer, then puch the mechanism through the hole on the Trophy. • The Sublimer should now touch the base of the trophy and be in line with the top right- hand corner of the Trophy. • If it doesn’t touch the base and just hangs in the air, then you know it’s the wrong way around and then you should swing the sublimer around until it looks like this:
Made with FlippingBook - professional solution for displaying marketing and sales documents online