AFTERCOOLER SYSTEMS (ACS) Axxiom Schmidt
SALE
In the Aftercooler System (ACS), the air rises through a stainless steel particulate filter that attracts condensed moisture. Removed moisture is collected in the bottom of the separator tank. The dryer, cooler air then exits the tank for use in the abrasive blasting operation. Options: 250 cfm - 2500 cfm
MOISTURE SEPARATOR Axxiom Schmidt
SALE
s reduce the amount of moisture in the blasting system, for smoother flow of abrasives and reduced contamination of controls. Suitable for drier, more arid environments where the level of performance offered by an AirPrep Aftercooler or Air Dryer may not be needed.
PORTABLE AIR-COOLED AFTERCOOLER ADI
SALE
Air-Cooled Aftercoolers use ambient air to lower the temperature of compressed air. These tools pass air over a set of warmed coils to condense any existing water vapor into liquid. This liquid is then removed through a drain within the unit’s housing to prevent buildup within a
larger compressed air system. Options: 250 CFM, 375 CFM
35
Made with FlippingBook - Online catalogs