Turning
Positive 55° (D)
Dimension (mm) Product code IC S LE D1 DC_0702_ 6.35 2.38 3.0 2.8 DC_11T3_ 9.52 3.97 3.0 4.4
●
Good condition ●
Machining conditions
Recommanded parameters
N
Rake angle (°)
RE (mm)
Inserts
Product code
f (mm/rev) 0.03-0.2 0.03-0.2 0.03-0.2 0.03-0.2 0.03-0.2 0.03-0.2 0.03-0.2 0.03-0.2 0.03-0.2
ap (mm)
● ● ● ● ● ● ● ● ●
DCGW 070202-1-NL-00
0.2 0.4 0.8 0.2 0.4 0.8 0.2 0.4 0.8
0° 0° 0° 5° 5° 5° 5° 5° 5°
0.05-0.5 0.05-0.5 0.05-0.5 0.05-0.5 0.05-0.5 0.05-0.5 0.05-0.5 0.05-0.5 0.05-0.5
070204-1-NL-00 070208-1-NL-00 070202-1-NL-05 070204-1-NL-05 070208-1-NL-05
DCGW 11T302-1-NL-05
11T304-1-NL-05 11T308-1-NL-05
Positive 90° （ S ）
Dimension (mm) Product code IC S LE D1 SC_0602_ 6.35 2.38 3.0 2.8 SC_09T3_ 9.52 3.97 3.0 4.4 SC_1204_ 12.7 4.76 3.0 5.5
●
Good condition ●
Machining conditions
Recommanded parameters
N
Rake angle (°)
RE (mm)
Inserts
Product code
f (mm/rev) 0.03-0.2 0.03-0.2 0.03-0.2 0.03-0.2 0.03-0.2
ap (mm)
● ● ● ● ●
SCGW 060204-1-LL-07
0.4 0.4 0.8 0.4 0.8
7° 7° 7° 7° 7°
0.05-0.5 0.05-0.5 0.05-0.5 0.05-0.5 0.05-0.5
09T304-1-LL-07 09T308-1-LL-07 120404-1-LL-07 120408-1-LL-07
Marked ： ● stock available
109
Made with FlippingBook - Online Brochure Maker