Turning
Insert Geometry Introduction
Geometry Width （ mm ）
Face grooving
Internal Machining
External Machining
Shape of cutting edge
Geometry Insert
Description
0.5 1.0 1.5 2.0 3.0 4.0
0.33
0.33
● Use precision insert ● Positive insert reduces the vibration ● 3 edge design, with good expansibility.
ATG
|
-
-
-
-
-
|
-
4.8
4.8
0.8
0.8
● Use precision insert ● Big rake angle and sharp edge design obtain good surface quality. ● 3 edge design ● Used in parting off & grooving stainless steel, heat resistant alloy and low carbon steel ● For low feed rate application ● Used in parting off & grooving low carbon steel and stainless steel ● For sticky material, pipe fitting, thin-walled part parting off, low cutting force ● For low to medium feed rate ● Used in parting off and grooving steel, alloy steel and stainless steel with high hardness and toughness. ● Strong cutting edge ● For parting off and grooving at medium to high feed rate ● Excellent chip breaking, suitable for grooving and finish turning. ● Geometry for finish machining, low cutting force, low feed, excellent surface quality. ● Ground insert, better precision control and positioning repeatability. ● Multifunctional insert for external, internal turning and grooving, parting off, face grooving and face turning ● Excellent chip control ● For low and medium feed rate. ● Multifunctional insert for external, internal turning and grooving, parting off, face grooving and face turning ● Stronger cutting edge design ● For medium feed rate
ASG
|
-
-
-
-
-
-
|
2.5 2.0
2.5
2.0
CS
|
|
-
-
-
3.0
-
3.0
-
3.0
3.0
2.0 3.0 4.0 5.0 6.0 2.0 3.0 4.0 5.0 6.0 8.0
2.0 3.0 4.0 5.0 6.0 2.0 3.0 4.0 5.0 6.0 8.0
3.0 4.0 5.0 6.0
3.0 4.0 5.0 6.0
CM
-
-
-
-
-
3.0 4.0 5.0 6.0
3.0 4.0 5.0 6.0
CH
-
-
-
-
-
2.0
2.0
2.0
3.0
3.0
2.0
2.0
GS
|
|
|
-
-
|
|
|
|
7.14
7.14
7.14
6.0
6.0
7.14
7.14
2.0 3.0 4.0 5.0 6.0 8.0 2.0 3.0 4.0 5.0 6.0 8.0 2.0 3.0 4.0 5.0 6.0 8.0 3.0 4.0 5.0 6.0 8.0
2.0 3.0 4.0 5.0 6.0 8.0 2.0 3.0 4.0 5.0 6.0 8.0
2.0 3.0 4.0 5.0 6.0 8.0 2.0 3.0 4.0 5.0 6.0 8.0 2.0 3.0 4.0 5.0 6.0 8.0 3.0 4.0 5.0 6.0 8.0
2.0 3.0 4.0 5.0 6.0 8.0 2.0 3.0 4.0 5.0 6.0 8.0 2.0 3.0 4.0 5.0 6.0 8.0 3.0 4.0 5.0 6.0 8.0
2.0 3.0 4.0 5.0 6.0 8.0 2.0 3.0 4.0 5.0 6.0 8.0 2.0 3.0 4.0 5.0 6.0 8.0 3.0 4.0 5.0 6.0 8.0
3.0 4.0 5.0 6.0
3.0 4.0 5.0 6.0
TS
-
-
3.0 4.0 5.0 6.0
3.0 4.0 5.0 6.0
TM
-
-
2.0 3.0 4.0 5.0 6.0 8.0 3.0 4.0 5.0 6.0 8.0 3.0 4.0 4.8 5.0 6.0 8.0
2.0 3.0 4.0 5.0 6.0 8.0 3.0 4.0 5.0 6.0 8.0 3.0 4.0 4.8 5.0 6.0 8.0
3.0 4.0 5.0 6.0
3.0 4.0 5.0 6.0
● External grooving, turning, profiling ● Medium feed rate
RM
-
● For turning and profiling aluminum alloy ● High positive rake angle and sharp cutting edge ● Ground inserts with high precision ● Ground insert with high precision, better precision control ● Complete product offering ● Good surface quality
3.0 4.0 5.0 6.0 3.0 4.0 4.8 5.0 6.0
3.0 4.0 5.0 6.0 3.0 4.0 4.8 5.0 6.0
RA
-
1.0
2.22
2.22
2.22
Precision ground
|
-
|
|
|
8.0
8.0
8.0
8.0
173
Made with FlippingBook - Online Brochure Maker