Turning
Parting Off-Grooving Series
CM: Double-edged inserts applicable to parting off and grooving
ACD
ACS
INSL
INSL
● Good condition General condition Bad condition
Machining conditions
●
●
● ●
Cutting parameter
Dimensions
P
M K N
Inserts
Product code
f (mm/rev)
CDX
CW RE INSL S
● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ● ●
19.7 0.04-0.15 2 0.2 20 5.1 19.7 0.03-0.09 2 0.2 20.7 5.1 19.7 0.03-0.09 2 0.2 20.7 5.1 19.7 0.03-0.09 2 0.2 21 5.1 19.7 0.03-0.09 2 0.2 21 5.1 19.7 0.05-0.16 3 0.2 20 5.1 19.7 0.04-0.14 3 0.2 20.7 5.1 19.7 0.04-0.14 3 0.2 20.7 5.1 19.7 0.04-0.14 3 0.2 21 5.1 19.7 0.04-0.14 3 0.2 21 5.1 19.7 0.06-0.18 4 0.3 20 5.1 19.7 0.05-0.16 4 0.3 20.7 5.1 19.7 0.05-0.16 4 0.3 20.7 5.1 24.7 0.06-0.20 5 0.3 25 5.0 24.7 0.06-0.18 5 0.3 25.7 5.0 24.7 0.06-0.18 5 0.3 25.7 5.0 24.0 0.06-0.22 6 0.3 25 5.0
ACD 202-CM
ACD 202-CM-6R ACD 202-CM-6L ACD 202-CM-15R ACD 202-CM-15L
●
●
● ● ● ●
●
●
● ● ● ●
ACD 302-CM
●
●
ACD 302-CM-6R ACD 302-CM-6L ACD 302-CM-15R ACD 302-CM-15L
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
ACD 403-CM
ACD 403-CM-4R ACD 403-CM-4L
●
●
ACD 503-CM
ACD 503-CM-4R ACD 503-CM-4L
●
●
● ● ●
ACD 603-CM ACS 202-CM ACS 302-CM ACS 403-CM ACS 503-CM ACS 603-CM
● ● ● ●
- - - - -
0.04-0.15 2 0.2 20 5.1 0.05-0.16 3 0.2 20 5.1 0.06-0.18 4 0.3 20 5.1 0.06-0.20 5 0.3 25 5.0 0.06-0.22 6 0.3 25 5.0
●
●
Remark: 1. if R/L style inserts are selected, the feed need to be reduced by 20-40%. 2. ACS single edged insert's Tmax is determined according to the tool holder.
●: Stock available ▲: Stock available now but will be replaced in the future.
180
Made with FlippingBook - Online Brochure Maker