Turning
Grooving-Turning Series
RM: Double-edged inserts applicable to external turning, grooving and profiling
INSL
● Good condition General condition Bad condition
Machining conditions
●
●
● ●
Cutting parameter
Dimensions
P
M K N
Inserts
Product code
f (mm/rev)
f (mm/rev)
Ap (mm)
CW RE INSL S
● ● ● ●
●
ATD 210-RM ATD 315-RM ATD 420-RM ATD 525-RM ATD 630-RM ATD 840-RM
0.06-0.15 0.12-0.25 0.4-1.0 2 1 20.7 5.1
0.08-0.18 0.15-0.30 0.5-1.5 3 1.5 20.7 5.1 ● ● ● ● ● ● ● 0.10-0.20 0.18-0.35 0.6-2.0 4 2 20.7 5.1 ● ● ● ● ● ● ● 0.12-0.25 0.20-0.40 0.7-2.5 5 2.5 25.7 5.0 ● ● ● ● ● ● ●
● ● ● ●
● ●
0.15-0.30 0.25-0.50 0.9-3.0 6 3 25.7 5.0 0.18-0.35 0.30-0.60 1.0-4.0 8 4 31.5 6.1
●
●
Grooving-Turning Series
RA: Double-edged ground inserts applicable to aluminium wheel turning and profiling
INSL
● Good condition General condition Bad condition
Machining conditions
●
●
● ●
Cutting parameter
Dimensions
P
M K N
Grooving
Turning
Inserts
Product code
CW RE INSL S
f (mm/rev)
f (mm/rev)
Ap (mm)
● ● ● ● ●
ATD 315-RA ATD 420-RA ATD 525-RA ATD 630-RA ATD 840-RA
0.08-0.18 0.15-0.30 0.5-1.5 3 1.5 20.7 5.1 0.10-0.25 0.2-0.45 0.6-2.0 4 2 20.7 5.1 0.11-0.28 0.2-0.50 0.7-2.5 5 2.5 25.7 5.0 0.12-0.30 0.22-0.60 0.9-3.0 6 3 25.7 5.0 0.15-0.40 0.25-0.65 1.0-4.0 8 4 31.5 6.1
●： Stock available ▲： Stock available now but will be replaced in the future.
184
Made with FlippingBook - Online Brochure Maker