Turning
Grooving - Turning Series
Ground inserts applicable to turning and grooving
INSL
● Good condition General condition Bad condition
Machining conditions
●
●
● ●
Cutting parameter Grooving f (mm/rev)
Dimensions
P
M K N
Suitable tool holder
Inserts
Product code
CW RE CDX S INSL
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
ATD 100E000G ATD 104E000G ATD 115E000G ATD 120E000G ATD 125E010G ATD 130E000G ATD 135E000G ATD 140E000G ATD 145E010G ATD 147E000G ATD 150E010G ATD 157E015G ATD 165E010G ATD 170E010G ATD 178E018G ATD 190E010G ATD 196E015G ATD 200E020G ATD 215E010G ATD 222E015G ATD 230E020G ATD 100E050G ATD 140E070G ATD 157E079G ATD 200E100G ATD 239E120G
2mm 0.02-0.05 1.00 0.00 2.00 5.1 20.700 2mm 0.02-0.05 1.04 0.00 2.00 5.1 20.700 2mm 0.02-0.05 1.15 0.00 2.00 5.1 20.700 2mm 0.03-0.05 1.20 0.00 2.00 5.1 20.700 2mm 0.03-0.05 1.25 0.10 2.00 5.1 20.700 2mm 0.03-0.05 1.30 0.00 2.00 5.1 20.700 2mm 0.03-0.05 1.35 0.00 2.00 5.1 20.700 2mm 0.03-0.06 1.40 0.00 2.00 5.1 20.700 2mm 0.03-0.06 1.45 0.10 2.00 5.1 20.700 2mm 0.03-0.06 1.47 0.00 2.50 5.1 20.700 2mm 0.03-0.06 1.50 0.10 2.50 5.1 20.700 2mm 0.03-0.07 1.57 0.15 2.70 5.1 20.700 2mm 0.03-0.07 1.65 0.10 2.70 5.1 20.700 2mm 0.03-0.07 1.70 0.10 3.00 5.1 20.700 2mm 0.03-0.07 1.78 0.18 3.00 5.1 20.700 2mm 0.04-0.09 1.90 0.10 3.00 5.1 20.700 2mm 0.04-0.09 1.96 0.15 3.00 5.1 20.700 2mm 0.04-0.09 2.00 0.20 3.00 5.1 20.700 2mm 0.04-0.10 2.15 0.10 3.00 5.1 20.700
2mm 0.04-0.10 2.22 0.15 2mm 0.04-0.10 2.30 0.20
- -
5.1 20.700 5.1 20.700
2mm 0.03-0.06 1.00 0.50 2.00 5.1 20.700 2mm 0.04-0.07 1.40 0.70 2.00 5.1 20.700 2mm 0.04-0.08 1.57 0.78 2.70 5.1 20.700 2mm 0.05-0.11 2.00 1.00 3.00 5.1 20.700
2mm 0.06-0.12 2.39 1.19
-
5.1 20.700
1. When the width of insert is less than 1.78mm, please pay attention to size A of the holder.
●： Stock available ▲： Stock available now but will be replaced in the future.
186
Made with FlippingBook - Online Brochure Maker