Turning
Grooving - Turning Series
Ground inserts applicable to turning and grooving
INSL
● Good condition General condition Bad condition
Machining conditions
● ●
● ●
Cutting parameter
Dimensions
P
M K N
Suitable tool holder
Turning
Grooving
Inserts Product code
CW RE CDX S INSL
f (mm/rev) f (mm/rev) ATD 300E150 3mm 0.15-0.30 0-1.50 0.08-0.19 3.00 1.50 - 5.1 20.70 Ap (mm) ATD 400E200 4mm 0.18-0.35 0-2.00 0.10-0.20 4.00 2.00 - 5.1 20.70 ATD 478E239 5mm 0.22-0.45 0-2.40 0.12-0.24 4.78 2.39 - 5.0 25.70 ATD 500E250 5mm 0.22-0.45 0-2.50 0.12-0.24 5.00 2.50 - 5.0 25.70 ATD 600E300 6mm 0.25-0.50 0-3.00 0.15-0.30 6.00 3.00 - 5.0 25.70 ATD 800E400 8mm 0.30-0.65 0-4.00 0.18-0.35 8.00 4.00 - 6.1 31.50
● ● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ●
Blank Insert of ATBD
INSL
Suitable tool holder
Dimensions
Inserts
Product code
P M K N S H
CW RE
INSL 21.2 21.2 21.2 26.2 26.2 32.0
S
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
ATBD 2.6 M200 ATBD 3.5 M200 ATBD 4.5 M200 ATBD 5.5 M200 ATBD 6.5 M200 ATBD 8.5 M200
0.10 0.10 0.10 0.10 0.10 0.12
5.1 5.1 5.1 5.0 5.0 6.1
2mm 2.60 3mm 3.50 4mm 4.50 5mm 5.50 6mm 6.50 8mm 8.74
Finished inserts need to be used together with Achteck grooving holder.
●： Stock available ▲： Stock available now but will be replaced in the future.
188
Made with FlippingBook - Online Brochure Maker