Turning
Overview of Turning Insert Geometries
Negative Inserts
Cross section geometry
Chip breaker
Features
Chip breaking range
A B
#4
BS
Finishing and semi-finishing profile turning Suitable for turning with changing depth of cut. Smooth chip evacuation
A
B
G NNSFW
1#
1st choice for stainless steel finish turning Light cutting chip breaker, low cutting force, suitable for machining slender shaft, thin wall and unstably clamped parts, good cutting performance
0.10
PB1
A
0.10
B
G NNSFW
4$
SC1
A
1st choice for heat resistant alloy finish turning Excellent performance at low depth of cut.
B
G NNSFW
.#
1st choice for stainless steel finish turning High positive rake angle reduced cutting force and built-up edge, can obtain much better surface quality. Very good chip breaking at low feed and cutting depth.
15°
MB2
A
0.20
B
G NNSFW
4-
Recommended for heat resistant alloy light turning. Suitable for heat resistant alloy, Ti- alloy. Sharp and wavy cutting edge can get good surface finish and good chip breaking results.
SL3
A
B
G NNSFW
28
Made with FlippingBook - Online Brochure Maker