Turning
K
Cast iron, chilled cast iron and short chip malleable cast iron
Basic grade
Supplemental grade
AC100K K05(K01-K15) CVD coated grade, has thick and smooth wear resistant coating and hard substrate, recommanded for grey cast iron high speed turning. AC102K K05(K01-K15) CVD coated grade, has thick and smooth wear resistant coating and hard substrate, recommanded for nodular cast iron high speed turning. AC202K K15(K10-K30) 1st choice for cast iron turning. It can deal with interrupted cutting due to its high wear-resitant CVD coating, used in finish to rough turning on cast iron at low to medium cutting speed.
PB60 K15(K10-K30) CBN grade. 1st choice for grey cast iron continuous and interrupted finish turning at high speed due to its good edge strength and wear resistance. PB90 K10(K01-K20) CBN grade. Suitable for grey cast iron and chilled cast iron interrupted finish turning due to its good edge strength and wear resistance. AT202 K15(K10-K20) Uncoated cermet grade. It has excellent built-up edge resistance and good plastic deformation resistance. It can be used in nodular cast iron finish turning when surface quality, small tolerance or low cutting force are requested..
N
Non-ferrous metals
Basic grade
AW100K N15 (N05-N15) Uncoated grade. It has both excellent wear resistance and sharp edge. Used in Al alloy rough to finish machining. PD20 N10 (N01-N20) PCD grade, used in non-ferrous material and non-metal material machining which can have longer tool life, completely clean cutting and good surface quality.
S
Heat resistant alloys
Basic grade
Supplemental grade
AP100S S15(S05-S25) 1st choice for heat resistant alloy. PVD coated grade has high hardness and plastic deformation resistance, can keep high performance and good wear resistance. AP200U S25(S15-S35) PVD coated grade. Used in low cutting speed or light interrupted cutting. Suitable for semi-roughing or continuous machining for a short time due to its good notch wear resistance and anti-heat shock capability.
AC100M S15(S05-S20) CVD coated grade, suitable for heat resistant alloy continuous high speed machining . AC200M S25(S15-S35) CVD coated grade, suitable for heat resistant alloy general machining.
H
Hardened materials
Basic grade
PB30 H10(H05-H15) CBN grade with low CBN content, is used in hardened steel continuous machining at high speed and light interrupted machining. PB60 H15(H10-H25) 1st choice of CBN grade medium CBN content for hardened steel interrupted machining and continuous machining at medium speed. PB90 H25 (H20-H30) Extra-hard CBN grade. Supplemental choice for hardened steel interrupted machining due to its good edge toughness.
45
Made with FlippingBook - Online Brochure Maker