Turning
Positive Round Insert
Dimension (mm) Product code IC S D1 AN RCGT_0803_ 3.18 8.0 3.4 7° RCGT_1003_ 3.18 10.0 4.4 7° RCGT_10T3_ 3.97 10.0 4.4 7° RCMX_1003_ 3.18 10.0 3.6 7° RCMX_1204_ 4.76 12.0 4.2 7°
Dimension (mm) Product code IC S D1 AN RCMX_1606_ 6.35 16.0 5.2 7° RCMX_2006_ 6.35 20.0 6.5 7° RCMX_2507_ 7.94 25.0 7.2 7° RCMX_3209_ 9.525 32.0 9.6 7°
● ● ● ●
Good condition General condition Bad condition
Machining conditions
●
● ●
●
Recommanded parameters
p
M
K
N S
RE (mm)
Inserts
Product code
f (mm/rev)
ap (mm)
● ● ●
RCGT 0803MOF-NC2
- - - - - - - - - - - -
0.10-1.00 0.70-3.3 0.20-1.30 0.90-4.0 0.20-1.30 0.90-4.0 0.48-0.90 3.5-9.0 0.55-1.20 4.0-12.0 0.65-1.50 5.0-15.0 0.25-0.50 1.5-4.0 0.30-0.60 2.5-5.0 0.40-0.75 3.0-7.0 0.48-0.90 3.5-9.0 0.55-1.20 4.0-12.0 0.65-1.50 5.0-15.0
1003MOF-NC2 10T3MOF-NC2
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
RCMX 2006MOS-PD8
2507MOS-PD8 3209MOS-PD8
RCMX 100300S
● ▲ ▲ ● ▲ ▲ ● ▲ ▲ ● ▲ ▲ ● ▲ ▲
120400S 160600S 200600S 250700S 320900S
●： Stock available ▲： Stock available now but will be replaced in the future.
90
Made with FlippingBook - Online Brochure Maker