CERAMIC FIBRE ADHESIVE
VITCAS ® VITCAS CFA - CERAMIC FIBRE ADHESIVE
Ceramic Fibre Adhesive is a silica based, high temperature, air setting cement for use as a refractory surface coating or for use as an adhesive for ceramic fibre modules and laminates to brickwork or metal. The adhesive should be applied onto the refractory or steel surface not the ceramic fibre. As a surface coating the cement can be thinned with water before application as a protection against gas velocities or molten metal. Maximum service temperature 1260°C /2300°F
SIZE 310 ml
UNIT PER CASE
CODE
12
VITCAS-CFA-310ML VITCAS-CFA-5KG VITCAS-CFA-25KG
1 1
5 Kg
25 Kg
ZIRCON REFRACTORIES
VITCAS ® ZIRCON PAINT COATING Zircon has a good resistance to the alkalis in molten glass and in metal slags. It is particularly effective in contact with aluminium alloys and can be applied to refractory bricks and alumina-silicate monolithic linings with equally good results. Zircon has good non wetting properties and there is also some evidence that zircon helps with corundum build up. Maximum service temperature 1750°C /3180°F.
SIZE
UNIT PER CASE
CODE
2.5 L 5 Kg
ZIRCON-PAINT-RM ZIRCON-PAINT-DRY
1 1
VITCAS ® ZIRCON PATCH Zircon patch is a high strength, chemically bonded patching material with a higher moisture content for both hot and cold repairs. Suitable for repairs to silica, alumina or zircon refractories, especially to repair the crowns and superstructures of glass furnaces. Maximum service temperature 1750°C /3180°F. VITCAS ® ZIRCON RAPID Vitcas ® Zircon Rapid is a two part cement consisting of a very high quality powder which is mixed together with a solution to form a brush coating paste or to a putty consistency. The product is designed for use as repair cement for jobs of a critical nature requiring high refractory and superior stability. The typical setting time is 10 minutes but setting times can vary according to the ambient temperature. Maximum service temperature 1750°C /3180°F. VITCAS ® ZIRCON COIL PLASTER CASTABLE Hydraulic setting coil plaster supplied as a dry powder to mix with water to a trowelling consistency, e.g. used to coat electric induction furnace coils as protection from molten metal penetration through furnace lining. This product also can be used as a high temperature castable. Maximum service temperature 1750°C /3180°F. Examples of Applications: Used in the foundry industry to line ladles and launders. Used in the glass industry to line glass tanks and furnace bottoms behind the bricks or blocks which are in contact with the molten glass. VITCAS ® ZIRCON RAM Zircon Ram is supplied in a semi-dry condition with a moisture content of approximately 5% for installation by pneumatic or vibration methods. It has excellent performance in contact with molten metal, slags and glass. Maximum service temperature 1750°C /3180°F.
SIZE 5Kg + Liquid
UNIT PER CASE
CODE
ZIRCON-RAPID
1
SIZE
UNIT PER CASE
CODE
25 Kg
1
ZIRCON-PATCH
SIZE 25 Kg
UNIT PER CASE
CODE
ZIRCON-RAM
1
SIZE 25 Kg
UNIT PER CASE
CODE
1
ZIRCON-COIL-PL
www.vitcas.com
27
Made with FlippingBook Online newsletter maker