SILICA REFRACTORY MORTARS
VITCAS ® SILCAS M
SIZE 5 Kg
UNIT PER CASE
CODE
White ready mixed, refractory air setting mortar. Maximum service temperature 1430°C /2600°F.
1 1
SILCAS-M-5KG SILCAS-M-25KG
25 Kg
Examples of Applications: Setting and jointing all of the insulating bricks and also extensively used in the precision casting industry in the investment casting lost wax process as an adhesive for sticking ceramic fibre blanket to ceramic shells.
VITCAS ® SILCAS A Silica based, ready mixed, refractory air setting mortar designed for setting and jointing both insulating and dense firebricks. Maximum service temperature 1400°C /2550°F Examples of Applications: Kiln and furnace side walls constructed from special shapes or conventional bricks. Kiln and furnace roofs constructed from arch bricks. Smaller kiln cars subjected to low-thermal and mechanical stress, kiln car decks - jointed pre-fired blocks. General repair work such as installation of burners, peep-hole blocks, thermocouples etc.
SIZE 25 Kg
UNIT PER CASE
CODE
SILCAS-A-25KG
1
VITCAS ® SILCAS 1C Silica based, high temperature, air setting cement specially developed for high temperature insulation bricks. When fired, the strength of the mortar is very closely matched to that of the insulating bricks to avoid the bricks cracking or breaking from the action of the mortar. Maximum service temperature 1550°C /2820°F.
UNIT PER CASE
SIZE 9 Kg
CODE
1
SILCAS-1C
VITCAS ® SILCAS RGW - REFRACTORY GLAZE WASH Refractory Glaze Wash 1000ºC for coating brick and monolithic linings best applied by brush or spray although it is sufficiently thixotropic for trowel application. The recommended method is to brush hard onto the surface to give maximum bonding and to ensure an integral coating. To achieve maximum glazing efficiency, furnace lining coated should be taken up to 1000°C if possible on the first heat. Maximum service temperature 1000°C /1830°F. CODE
SIZE 25 Kg
UNIT PER CASE
SILCAS-RGW
1
VITCAS ® SILCAS HP - HOT PATCH REPAIR Silcas HP hot patch is a repair cement used to repair and seal door jambs in coke ovens. To repair foundry ladles and launders in non ferrous foundries when temp. does not exceed 1430°C / 2600°F.
SIZE 25 Kg
UNIT PER CASE
CODE
SILCAS-HP
1
www.vitcas.com
30
Made with FlippingBook Online newsletter maker