REFRACTORY PLASTIC MOULDABLE
VITPLAST 45AB
A refractory plastic mouldable with excellent adhesion which is primarily designed for rapid repairs to brick and monolithic linings that can be installed using pneumatic hammer or hand rammed. Examples of Applications: Used in foundry ladles, launders and repairs to boiler linings. For in-situ repairs in marine boilers.
Grade Bond Type Application Technique Quantity required per m 3 Grain Size Maximum service temperature Chemical Analysis (%) Al 2 O 3 SiO 2 Fe 2 O 3 Phisical Properties Bulk Density (kg/m 3 ) Thermal Conductivity (w/mk) Cold Crushing Strength (MN/m 2 ) Permanent Linear Change (%) T ECHNICAL D ATA
VITPLAST-45 AB Ceramic Ramming 2300 kg <8mm 1600°C /2900°F
44.7 53.5 1.0 1600°C/hrs 2120
Oven Dried 2100
1000°C 2020
0.99 14.5 -0.4
30.0 -1.8
3.0 -1.0
PACK Box/Bucket
SIZE 25 kg
ON PALLET 40
WEIGHT 1000 kg
PALLET SIZE (mm) 1200 x 1000 x 1100
Note: The information only shows the most relevant product grades. This is not an exhaustive list of all the products which are available.
www.vitcas.com
13
Made with FlippingBook Digital Publishing Software