CENTRAL HEATING WATER TREATMENT
VITCAS ® CENTRAL HEATING SYSTEM INHIBITOR Vitcas ® Central Heating System Inhibitor is a multi-purpose treatment, specially designed to protect the entire central heating system from scale, sludge and corrosion. Vitcas ® Central Heating System Inhibitor is compatible with plastic and glass-fibre header tanks and with all metals used in central heating systems which includes iron, steel, brass, copper and aluminium. System Inhibitor is also suitable for micro-bore systems constructed from plastic pipes. To ensure ongoing protection, annual treatment with System Inhibitor is recommended. System Inhibitor does not contain mineral oil. System Inhibitor is only suitable for fully indirect systems. Not suitable for use with PRIMATIC single feed cylinders. If the boiler suffers from knocking and kettling, then boiler Vitcas ® Central Heating Noise Silencer is recommended in conjunction with Vitcas ® Central Heating System Inhibitor for optimum long term protection. For use in accordance with BS 7593: 2006
VITCAS ® CENTRAL HEATING SYSTEM CLEANER
Vitcas ® Central Heating System Cleaner will remove commissioning and flux residues from new systems and restore circulation to old systems which suffer from sludge. System Cleaner should also be used when components are replaced or existing systems are extended. System Cleaner is compatible with plastic tanks, micro-bore and all metals (including aluminium) used in central heating systems. Vitcas Central Heating System Cleaner is only suitable for fully indirect systems. Not suitable for use with PRIMATIC single feed cylinders. If the boiler suffers from knocking and kettling, then Vitcas ® Central Heating Boiler Noise Silencer is recommended in conjunction with System Inhibitor for ongoing protection after the flush.
VITCAS ® CENTRAL HEATING LEAK SEALER
Seals inaccessible leaks and weeping joints in central heating systems. Vitcas ® Internal Leak Sealer is compatible with plastic tanks, micro bore and all metals (including aluminium) used in central heating systems. Vitcas ® Leak Sealer is an internal leak sealer that can help you avoid costly repairs. Use it for sealing small leaks and weeping joints in central heating systems. It will not block the pump, valves or air vents. A soft seal will form after 1-24 hours of entering the primary circuit. Leak Sealer is compatible with all other water treatment products. Central heating systems should also be protected with Vitcas ® Central Heating Inhibitor. Leak Sealer should be added separately. Vitcas ® Leak Sealer is only suitable for fully indirect systems. Not suitable for use with PRIMATIC single feed cylinders.
Vitcas ® Central Heating Boiler Noise Silencer is a non-acid boiler descaler which stays in the system for life; no need to flush. Noise Silencer is compatible with plastic tanks, microbore and all metals (including aluminium) used in central heating systems. Vitcas ® Boiler Noise Silencer is only suitable for fully indirect systems. Not suitable for use with PRIMATIC single feed cylinders. Knocking and kettling can be especially irritating in the early hours or at night. Noisy boilers are usually attributable to hard water lime scale and sludge deposit formation on the heat exchanger surfaces. These deposits also reduce heat transfer which increases fuel bills and reduces the service life of the boiler. Vitcas ® Boiler Noise Silencer will remove scale and baked on sludge deposits and prevent them from reforming, thus restoring heating efficiency while reducing the noise and extending the life of the boiler. VITCAS ® CENTRAL HEATING BOILER NOISE SILENCER
Note: The information only shows the most relevant product grades. This is not an exhaustive list of all the products which are available.
www.vitcas.com
40
Tel: +44 (0) 117 911 7895
Made with FlippingBook Digital Publishing Software