CERAMIC FIBRE RIGIDISER
Vitcas ® Ceramic Fibre Rigidiser is a silicate compound for treating the surface of ceramic fibre blanket, modules, boards and vacuum formed components to give a hard outer shell in order to seal the surface and protect against erosion.
Examples of Applications:
Installation:
• Surface coating for ceramic fibre materials exposed to high velocity gases • Hardening coat for ceramic fibre materials used in forges • Sealing coat for ceramic fibre materials used in ceramic kilns to prevent fibres dropping onto the work • Surface hardener for vacuum formed ceramic fibre shapes
Can be applied by brushing, dipping, rolling and spraying. Ceramic fibre surfaces should be clean and free of grease and oil.
Coverage:
The coverage will vary with the density of the blanket and the method of application but on average 5 litres will cover 2m 2 as a surface coat and 20 litres will be needed to cover 1m 2 of 25mm thick ceramic fibre blanket (based on 1260 grade 128 density).
T ECHNICAL D ATA
Clear 28 – 30 1400 800 - 1200 1.40 12
Colour Solid Content, % silica Density kg/m 3 Viscosity, Centipoises at 25 O C Specific Gravity pH value:
Note: The information only shows the most relevant product grades. This is not an exhaustive list of all the products which are available.
www.vitcas.com
65
Made with FlippingBook Digital Publishing Software