CERAMIC FIBRE ADHESIVE
Silica based, high temperature air setting adhesive with a maximum service temperature of 1260°C/2300°F. The adhesive can be used in conjunction with all ceramic fibre products, blanket, boards and paper as well as an adhesive for glass fibre products. Excellent bonding properties between ceramic fibre, brickwork, refractory castable and metal. As a surface coating the adhesive can be thinned with water before application as a protection against gas velocities or molten metal. VITCAS CFA
T ECHNICAL D ATA Grade Bond Type Colour Application Technique P.C.E. Refractoriness. Temperature (Orton Cone) Grain Size Maximum service temperature Chemical Analysis (%) Al 2 O 2 SiO 2 Fe 2 O 3 K 2 O + Na 2 O Recommended Joint Thickness Quantity required per 1000 bricks
Vitcas CFA Air setting Light grey Trowelling / dipping 1317 C (9) <0.5mm 1260 C / 2300 F
- 71.0
0.3 8.2
- -
(230x114x76mm) Coverage per 1 kg
~1m 2
PACK Bucket Bucket
SIZE 5 kg 25 kg
ON PALLET 180 40
WEIGHT 900 kg 1000 kg
PALLET SIZE (mm) 1200 x 1000 x 1100 1200 x 1000 x 1100
PACK Cartridge
SIZE 310ml
UNIT PER CASE 12
ON PALLET 1440
WEIGHT 1000 kg
PALLET SIZE (mm) 1200 x 1000 x 1100
Note: The information only shows the most relevant product grades. This is not an exhaustive list of all the products which are available.
www.vitcas.com
66
Tel: +44 (0) 117 911 7895
Made with FlippingBook Digital Publishing Software