SNAP-SNIP-PROJECTORS

SNAP/SNIP PROJECTORS Operation and Maintenance

INSTRUCTIONS

Thank you for your purchase.

Inspect the entire unit immediately after you take it out of the box. If there is any concealed damage, please contact us immediately at 800-467-6222 to report. You only have 5 days from receipt of order to report damage for replacement or refund.

4537 Gibsonia Rd Gibsonia, PA 15044

800-467-6222

Take time to familiarize yourself with the equipment, each component, and the recommended maintenance of this equipment before using or engaging any person with it. Please file this instruction sheet in an accessible location; this sheet must be read by and not alluded to anyone who is supervising or using TFH Equipment.

info@tfhusa.com

www.specialneedstoys.com

Packing List: •

SNAP Projector with attached stand

• Wheel Rotator with magnetic SNAP Adapter • Wheel Rotator Connector pegs (2)

Follow instructions included to assemble projector.

Operation:

1. Insert the 2x connection pegs into the red/black holes found on the top of the Projector.

2. The Wheel Rotator fits on these two connection pegs

3. The Wheel Rotator as a speed control knob on the front.

4. Turn knob clockwise to increase the rotation speed. Turn counterclockwise to decrease the rotation speed.

All TFH Products are to be used under adult supervision at all times.

TFH092021

5. The two silver switches on the front of the Wheel Rotator turns the rotator on and off and changes the rotational direction. 6. Wheel Rotator comes with a SNAP Adaptor on the backside for attaching Projector Wheels.

6.

7. Gently guide your Projector Wheel onto the magnetic adaptor.

8. If you have Projector Wheels that require a peg to attach, loosen the small grub screw on the side of the SNAP Adaptor and gently pull the SNAP Adaptor off the peg. 9. Align your projector wheel and the peg and gently apply pressure to securely attach the projector wheel. 10. Point projector to desired location and manually focus the lens for clarity. Maintenance • CLEANING: Any disinfectant wipe can be used on the projector. Never spray cleaning solution directly onto projector.

8.

9.

• Dust and/or use compressed air to remove any surface dust.

• Clean lens with glass cleaner and soft cloth.

Safety Precautions - The safety of your clients is dependent on the appropriate choice of activity to match yet challenge their physical abilities. Use appropriate spotting / safety techniques. In addition, the layout of your activity area, proper installation and maintenance of your equipment is critical. TFH equipment is not intended for general recreational use. Under no condition should this equipment be used without proper supervision. This sheet is for example only. It is not meant to, in any way, replace local, State, or Federal standards. Be aware - it is your responsibility to find all pertinent safety information that pertains to your facility.

All TFH Products are to be used under adult supervision at all times.

TFH092021

Page 1 Page 2

www.specialneedstoys.com

Made with FlippingBook - professional solution for displaying marketing and sales documents online