Development Standards | Signage
6. Government flags; and
single rectangle that will enclose the combined letters and symbols. 3. Sign area for signs contained entirely within a cabinet and mounted on a wall, roof, or monument shall be calculated by measuring the front surface area of the cabinet. 4. Sign area for temporary signs shall include all portions of the sign attached to the primary supporting structure of the sign, including material additions to the sign.
7. Nonverbal religious symbols attached to a place of worship.
D. Prohibited signs
1. Portable signs including, but not limited to, sandwich/A- frame signs and mobile readerboard signs, and excluding signs permitted under SDC 21.06.050G.; 2. Signs which, by reason of their size, location, movement, content, coloring, or manner of illumination, may be confused with traffic control signs or signals; 3. Signs located in the public right-of-way, except where permitted in this chapter; provided, that in no case shall temporary signs permitted under SDC 21.06.050G. be located within travel lanes or sidewalks, or be attached to traffic control signs, utility or signal poles; 4. Posters, pennants, strings of lights, blinking lights, balloons, searchlights, and other displays of a carnival nature; except as architectural features, or on a limited basis as seasonal decorations or as provided for in SDC 21.06.050G. as temporary commercial displays; and
5. Billboards.
E. Sign area calculation
1. Sign area for pole signs shall be calculated by determining the total surface area of the sign as viewed from any single vantage point, excluding support structures. 2. Sign area for letters or symbols painted or mounted directly on walls or monument signs or on the sloping portion of a roof shall be calculated by measuring the smallest
350 | Title 21: Sammamish Development Code
Effective | January 1, 2022
Made with FlippingBook Ebook Creator