Development Standards—Density and Dimensions | Town Center
21.07.050 Development Standards—Density and Dimensions A. Purpose The purpose of this chapter is to establish density and dimensional standards for development to implement Town Center policy goals and objectives. The standards are established to provide a balance between certainty and flexibility in project design, and promote compatibility between uses. B. Interpretation of tables and general development capacity provisions 1. SDC 21.07.050C. contains general density and dimension standards for all Town Center zones. Additional provisions, requirements, incentives, rules, and exceptions are set forth elsewhere in this Chapter. 2. Commercial development capacity will be allocated during the unified zone development process set forth in SDC 21.07.120 for the mixed-use nodes (also see SDC 21.07.050D. and the Town Center Plan, Chapter IV, Land Use Element). 3. Development standards are listed down the left side of both tables, and the zones are listed at the top. The matrix cells contain the minimum requirements of the zone. The parenthetical numbers in the matrix identify specific requirements applicable either to a specific use or zone. A blank box or the words “none” or “NA” indicates that there are no specific requirements. If more than one standard appears in a cell, each standard will be subject to any applicable footnote following the standard.
Effective | January 1, 2022
Title 21: Sammamish Development Code | 433
Made with FlippingBook Ebook Creator