SPECIFICATIONS LOW CUBE AND HIGH CUBE PNEUMATIC TANK SPECS
Piping 4” schedule 40 aluminum with discharge under axles Tees Aluminum BTI SiphonFlow tees Gauges Liquid filled tank and line pressure gauges in illumi- nated cabinet Ladder MAC Stairs at rear with double hand rails Walkway Non-skid tape between toe rails Hose Tube 8” x 21’ aluminum tube on curb side with door at rear Lighting LED lamps with lifetime guarantee, bolt-on alumi- num rear light boxes Suspension Hendrickson Intraax AAT230-RC with 250 air bags with hot dipped galvanized hangers Axles 23,000 lb. raised center axles with parallel spindles Brakes Q-type 16.5” x 7” S-cam brakes, Meritor-Wabco 4S-2M ABS Fifth Wheel Hot dipped galvanized 3/8” plate, adjustable in 2” increments Landing Gear 2-speed, no-lube, 5 year warranty Fenders Rolled edge aluminum with bolt-on supports
Material Standard enhanced mill finish 5454-H32 aluminum Construction (L) Smooth aluminum exterior with internal bar type bracing and internal hopper apex reinforcing plates Construction (H) Smooth aluminum exterior with internal bar type bracing and internal hopper apex reinforcing plates. Food grade interior weld and vessel treatment. Framing Extruded aluminum front and rear frames Manholes 20” cast aluminum covers with 6 cam type latches Air Inlet (L) 3” aluminum line at curb side front with proportion- ing valve and two check valves Air Inlet (H) Aluminum line at driver side front, proportioning valve with stainless steel disc and white gaskets, two check valves Discharge Valves (L) 5” butterfly valves with aluminum handles and extensions on street side Top Air (H) Includes butterfly valve with Allomax disc, white gaskets and check valve Aeration (L) BTI SpinFlow aerators with wear plates Discharge Valves (H) 5” butterfly valves with Allomax discs and white gaskets Aeration (H) BTI SpinFlow aerators with food grade hoses
(L) - Specific to Low Cube Tanks (H) - Specific to High Cube Tanks
Air Cooler
Rear Air Inlet
Air Piping
Made with FlippingBook Annual report maker