68 D
INDESTRUCTIBLE HANDLE HAMMERS
ATD-4082 (SET)
ATD-4094
Deliver a blow with minimum marring or surface damage DEAD BLOW HAMMERS and RUBBER MALLETS
ATD-4020 (SET)
ATD-4095
3 Pc. Dead Blow Hammer Set 8 oz., 1 lbs. and 2 lbs.
ATD-4096
ATD-4082
$47.69
B.A.M. ™
2 Pc. Rubber Mallet Set 16 oz. and 32 oz. mallets
$25.95
ATD-4020
Drop forged, polished steel heads that exceed ANSI specs FIBERGLASS HANDLE HAMMER SETS
5 Pc. Miscellaneous Hammer Set 16 oz. Ball Pein, 32 oz. Ball Pein, 3 lbs. Sledge, 3 lbs. Cross Pein and 32 oz. Rubber Mallet 5 Pc. Ball Pein Hammer Set 8 oz., 12 oz., 16 oz., 24 oz. znd 32 oz. Ball Pein Hammers
ATD-4045 (SET)
ATD-4045
$112.69
ATD-4047 ATD-4048 ATD-4063 ATD-4064 ATD-4076 ATD-4078 ATD-4079
$47.09 $74.09 $50.49 $50.19 $102.99 $106.29 $96.79
32 oz. Ball Pein Hammer - 14” Handle
48 oz. Ball Pein Hammer - 14” Handle
ATD-4035
$87.09
2.5 lbs. Cross Pein Hammer - 16” Handle
4 lbs. Sledge Hammer - 12” Handle
6 lbs. Sledge Hammer - 16” Handle
Features: Hardened tips; each piece marked with size; convenient roll pouch for storage 32 PC. TRANSFER PUNCH SET CNT-3S301B................ $75.09
8 lbs. Sledge Hammer - 12” Handle
8 lbs. Sledge Hammer - 16” Handle
Cutaway showing steel bars and locking plates
B.A.M. Trio Includes 32 oz. (4047), 2.5 lbs. (4063), and 4 lbs. (4064)
ATD-14033
$132.19
3 PC. X-LONG PIN PUNCH SET
3 PC. DEAD BLOW HAMMER SET • (1) 12 oz. Brass Hammer with brass non-sparking platted cap • (1) 1 lb. Ball Pein Hammer with steel plated cap • (1) 1/2 lb. Dead Blow Hammer • Shock absorbing steel shot filled canister for maximum force with reduced rebound
Four spring steel bars run all the way through the handle and are locked in the hammer head using steel locking plates. A special bonding process ensures that the head will never become dislodged from the handle. The ergonomic rubber grip handle absorbs vibration and reduces fatigue. *There are two spring steel bars in the ATD-4047 & ATD-4048 handles.
B.A.M. ™
$62.29 KAS-856-3ST
PUNCHES & CHISELS Forged chrome vanadium steel polished to a smooth finish and tempered for strength. All ATD punches and chisels are fully guaranteed against defective material and workmanship. Number Description
MYT-61044
ATD-729
• 16” length for increases access to hard-to-reach areas • Pin diameter sizes: 1/4”, 5/16” and 3/8” • High carbon molybendum tool steel with striker cap
$45.29 TIT-63133
Includes
Price
ATD-4075 ATD-759 ATD-761 ATD-762 ATD-760
$27.29 $28.19 $19.39 $22.19 $36.89
Pin: 1/4” x 4” and 3/8” x 6”; Drift: 1/2” x 8”
3 Pc. Non-Sparking Brass Punch Set
Long Tapers: 3/16”, 1/4” and 5/16”
3 Pc. Long Taper Punch Set
WLT-11109 (SET)
WLT-21236
Pin: 1/8”, 5/32”, 3/16” and 1/4”; Solid: 1/4”; Center: 3/8”
5 Pc. Pin Punch Set
Roll Punches : 1/8”, 5/32”, 3/16”, 1/4” and 5/16”
5 Pc. Roll Pin Punch Set
Pin: 1/8”, 3/16” and 1/4”; Solid: 1/4”; Center: 3/8”; Cold Chisels: 1/2”, 5/8” & 3/4”
8 Pc. Punch and Chisel Set
Pin: 3/16”x 3/8”x 6”, 1/8”x 3/8”x 5”, 3/32”x 3/8”x 5”and 1/4”x 1/2”x 6”; Center: 1/8”x 3/8” x 5”; Taper: 3/8” x 5/8” x 10”, 5/32” x 1/2” x 9”, 1/8” x 1/2” x 10” and 1/8” x 3/8” x 8-1/2”; Cold Chisels: 1/2”, 5/8”, 7/8” and 1” Pin: 3/32”, 1/8”, 5/32”, 3/16”1/4”and 5/16”; Starter: 1/8”, 5/32”, 3/16”, 1/4”and 5/16”; Cen- ter: 1/4”, 3/8” and 1/2”; Flat Chisels: 1/4”, 3/8”, 1/2”, 5/8”, 3/4” & 7/8” Pin: 3/32”–3/8”; Starter: 3/32”–5/16”; Cap Chisels: 1/4” and 5/16”; Center Punches: 1/4”–1/2”; Diamond Point Chisel: 5/16” and 3/8”; Half Round Nose Chisel: 5/16”; Flat Chisels: 1/4”–7/8” Center Punch 3/16-5mm x 5”; Cold Chisel 1/4-6mm x 5”; Cold Chisel 1/2-13mm x 6”; Cold Chisel 5/8-22mm x 6-1/2”; Cold Chisel 3/4-19mm x 7; Cold Chisel 3/8-10mm x 5-1/2”; Line- Up Punch 1/8-3mm” x 7 7/8”; Pin Punch 3/32” x 4-1/2”; Pin Punch 1/8” x 4-3/4”; Pin Punch 5/32” x 5”; Pin Punch 3/16” x 5-1/4”; Pin Punch 1/4” x 5-3/4”; Solid Punch 1/8” x 5”; Solid Punch 3/16” x 5”
ATD-714
$43.19
14 Pc. Punch and Chisel Set
ATD-720
$56.39
20 Pc. Punch and Chisel Set
ATD-729
$74.79
29 Pc. Punch and Chisel Set
WLT-11111
WLT-11113
MYT-61044 14 Pc. Punch and Chisel Set
$103.89
Number
Description
Length
Material
Face Dia.
Price
WLT-20836 WLT-21236 WLT-55114 WLT-55214 WLT-55314 WLT-55416 WLT-55830
Call For Price Call For Price Call For Price Call For Price Call For Price Call For Price Call For Price
8 lbs. BASH® Sledge Hammer
38”
Rubber/Steel
3”
MYT-89021 Hammerless 3 Pc. Set
$34.95
Prick punch/ center punch tool, 3/16 pin punch/ hammer tool, and a cold chisel/ hammer tool
12 lbs. BASH® Sledge Hammer
38”
Rubber/Steel
3”
24 oz. BASH® Dead Blow Hammer
13-1/2”
Rubber/Steel
1-1/2”
32 oz. BASH® Dead Blow Hammer
14”
Rubber/Steel
1-3/4”
• Roll spring (pin) punches have a pilot point that fits into the hollow center of the pin • Taper punches with self-centering nose that aligns holes for accurate assembly • Pin punches with reverse taper eliminates sticking in work piece • All punches and chisels are forged from high-carbon molybdenum tool steel, individu- ally heat-treated and hardened the entire length with a tempered striking end for durability
48 oz. BASH® Dead Blow Hammer
14”
Rubber/Steel
1-7/8”
64 oz. BASH® Dead Blow Hammer
16-1/2”
Rubber/Steel
2-1/4”
8 lbs. BASH® Dead Blow Hammer
31-1/2”
Rubber/Steel
2-5/8”
ATD-99800
ATD-99803
ATD-99802
B.A.S.H ® HAMMER KITS
Number
Description
Includes
Price
Includes: 4 lbs., 12” BASH® Sledge Hammer, 32 oz., 14” BASH® Ball Pein Hammer and 2 lbs., 16” BASH® Cross Pein Hammer Includes: 2 lbs./14”; 3 lbs./14” and 4 lbs./16” BASH® Dead Blow Hammers Includes: 2-1/2 lbs./12” and 4 lbs./12” BASH® Sledge Hammers; 1-1/2 lbs./14” and 2 lbs./14” BASH® Dead Blow Hammers; 2 lbs./16” BASH® Cross Pein Hammer and 1-1/2 lbs./14” BASH® Ball Pein Hammer
ATD-99800
$47.99
WLT-11111
Call For Price
Long Tapers: 1/8”, 5/32”, 3/16”, 7/32”, 1/4”
5 Pc. Long Taper Punch Set
3 Pc. BASH® Hammer Kit
ATD-99801
$30.29
Center Punch: 4-1/4”; Pin Punch: 1/16”, 5/64”, 3/32”, 1/8”; Solid Punch: 3/32”
6 Pc. Precision Punch Set
WLT-11113
Call For Price
3 Pc. BASH® Dead Blow Hammer Kit
ATD-99802
$33.19
Chisel: 3/8”, 5/8”; Center: 5”; Pin: 3/16”; Solid: 3/16”
5 Pc. Punch and Chisel Set
ATD-99803
$84.79
Roll Punches: 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”
12 Pc. Roll Spring (Pin) Punch Set
WLT-11109
Call For Price
6 Pc. BASH® Master Hammer Set
ATD-99804
$44.19
Roll Punches: 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”
6 Pc. Roll Spring (Pin) Punch Set
Made with FlippingBook flipbook maker