UTILITARIAN DESIGN STANDARDS
Applicant Evaluation
Staff Evaluation by:_____
Standard
Sheet
Yes
No
N/A
Yes
No
3.1.3.a. An entry to ground floor commercial uses or a primary building entrance located within 25 feet of the corner of the building.
3.1.3.b. A different material application, color, or fenestration pattern of windows and doors from the rest of the façade located within 40 feet of the corner of the building on both sides.
3.1.3.c. A change in height of at least five feet (taller or shorter) compared to the height of the abutting façade, located within 40 feet of the corner of the building on both sides.
3.1.4 Roof Line Variations Roof lines shall not extend horizontally more than 40 feet in length without at least one of the following prominent changes described below:
3.1.4.a. Provide variation in roof form, such as hipped, gable, shed, flat, and mansard.
3.1.4.b. Provide variation in architectural elements, such as parapets, varying cornices, chimneys, and reveals.
3.1.4.c. Provide variation of roof height of at least 18 inches, as measured from the highest point of each roof line.
3.1.5 Flat Roofs and Parapets Parapets shall be provided around the perimeter of a flat roof.
Page | 49
Made with FlippingBook - professional solution for displaying marketing and sales documents online