PLUMBING PRODUCT CATALOGUE 2024 WA EDITION
Contents
Water Tanks Premium Corrugated Tanks Premium Flat Walled Tanks Slimline Tanks Underground Storage Tanks Horizontal Underground Tanks Vertical Underground Tanks
3-5 3 4 5 6-7 6 7
Wastewater Systems Septic Tanks
8-13 8 9 11-12
Aerobic Treatment Units (ATU) Below Ground ATU Systems Domestic Below Ground ATU 1.8kl Commercial Below Ground ATUs 1.8kl to 30kl Above Ground ATUs
11 12 13
Effluent Disposal Systems Leach Drain Systems Flatbed Leach Drain Modular Leach Drain Spray and Drip Irrigation Systems
14-16 14 14 15 16
Grease Arrestors
17
Transfer Pump Stations
18
Stormwater Systems Flo-Vault ® Flo-Void ® SportsDry Titan Tank ® Flo-Grid ® Flo-Tank ® Flo-Cell ® Subsurface Drainage Trench Drainage Flo-Wall ®
19-29 19 20 21 22 23 24 25 27 28 29
Water Tanks Premium Corrugated Tanks
20 Year Warranty PREMIUM CORRUGATED TANK
RT32000
RT22500
RT9000
RT13500
RT9500
RT9000S
RT4500S RT2500 RT4500
RT1000 RT2500S
Premium Corrugated Tanks
Features • One piece construction • Attractive heritage design • Corrugated for strength and traditional appearance • UV stabilised to withstand our harsh climate • Durable and impact resistant polyethylene for long life • Manufactured in guidance with Australian Standards • Self supporting lid design eliminates need for centre support pole • Available in a range of colours
Capacity
Diameter (mm)
Inlet Height (mm)
Total Height (mm)
Code
Litres
Gallons
RT1000
1,000
220
1000
1495
1550
RT2500
2,500
550
1400
1900
2050
RT2500S
2,500
550
1850
1070
1250
RT4500
4,500
1,000
1850
1950
2100
RT4500S
4,500
1,000
2420
1200
1350
RT9000
9,000
2,000
2420
2255
2430
RT9000S
9,000
2,000
2950
1560
1825
RT9500
9,500
2,100
2600
1915
2150
RT13500
13,500
3,000
2950
2075
2325
RT22500
22,500
5,000
3550
2550
2825
RT32000
32,000
7,050
3950
2740
3000
Standard Fittings
90mm PVC Mesh Overflow
Ball Valve
Screw On Lid
40mm Brass Outlet for tap
Strainer Basket
2024 | © Coerco
3
Water Tanks Premium Flatwalled Tanks
20 Year Warranty PREMIUM FLAT WALLED TANK
JRR50000
JRR14000
JRR25000
JRR10500
JRR5300
Premium Flat Walled Tanks
Features • One piece construction
Capacity
Diameter (mm)
Inlet Height (mm)
Total Height (mm)
Code
• Sturdy, reliable and built to last • UV stabilised to withstand our harsh climate • Supplied with screw in lid, overflow, outlet and ball valve • Manufactured in guidance with Australian Standards • Self supporting lid eliminates need for centre support pole • Available in all of our colour range
Litres
Gallons
JRR5300
5,300
1,200
1800
2275
2275
JRR10500
10,500
2,400
2450
2445
2450
JRR14000
14,000
3,100
2475
3080
3200
JRR25000
25,000
5,500
3825
2535
2555
JRR50000
50,000
11,100
4575
3285
3400
Standard Fittings
Strainer Basket
90mm PVC Mesh Overflow
Ball Valve
Screw On Lid 40mm Brass Outlet for tap
4
2024 | © Coerco
Water Tanks Slimline Tanks
10 Year Warranty SLIMLINE TANK
RTS800
RTS1500
RTS3000
Slimline Tanks
Features • Attractive space saving design • Ideal for under eave line or pathway placements • Manufactured in guidance with Australian Standards • Available in all of our colour range
Code
Description
Dimensions (mm)
Inlet Height (mm)
Total Height (mm)
625
RTS800
800ltr Slimline Tank
1450
1500
1250
875
RTS1500
1,500ltr Slimline Tank
1950
2000
1325
805
RTS3000
3,000ltr Slimline Tank
2050
2120
2615
Standard Fittings
90mm PVC Mesh Overflow
25mm Brass Outlet for tap
Screw On Lid
25 mm Drain Bung
Strainer Basket Bib Cock Tap
Standard Tank Colours
2024 | © Coerco
5
Underground Storage Tanks Horizontal Underground Tanks
URT11000
URT4000
URT7000
URT23000
URT15000
URT19000
URT27000
URT31000
Product images are a close guide only and may not represent actual product
Horizontal Underground Tanks
Features • Underground design offers greater flexibility • Engineered and manufactured in accordance with Australian Standards • UV stabilised to withstand the harsh Australian climate • Made using the best linear low-density food grade polyethylene • Available in a wide range of sizes to suit all applications • Sealed lid for additional safety • Unbeatable quality and value for money • A wide range of riser options available for access
Code
Description
URT4000 4,000 Litre (880 Gallon) Underground Tank incl. 455mm Lid URT7000 7,000 Litre (1,600 Gallon) Underground Tank incl. 455mm Lid URT11000 11,000 Litre (2,500 Gallon) Underground Tank incl. 455mm Lid URT15000 15,000 Litre (3,300 Gallon) Underground Tank incl. 455mm Lid URT19000 19,000 Litre (4,200 Gallon) Underground Tank incl. 455mm Lid URT23000 23,000 Litre (5,100 Gallon) Underground Tank incl. 455mm Lid URT27000 27,000 Litre (6,000 Gallon) Underground Tank incl. 455mm Lid URT31000 31,000 Litre (7,000 Gallon) Underground Tank incl. 455mm Lid
6
2024 | © Coerco
Underground Storage Tanks Vertical Underground Tanks
VUT-600A
VUT-900A
VUT-1200A
VUT-2000A
VUT-3000A
VUT-4000A
Vertical Underground Tanks
Features • Manufactured from durable polyethylene • Approved to requirements of Australian Standard AS/NZS1546.1 • Engineered design with ribs for hold-down by backfill • Chemical and effluent resistant • Impact resistant but lightweight for easy installation • Integrated lifting lugs • Base designed for maximum strength and pump out • Levelling legs including tie down/anchor points for high water table applications • Suitable for a wide range of pumps • Range of lid options available
Code
Description (mm)
600 Litre Vertical Underground Tank with Poly Lid and Gasket - Class A Loads Only 900 Litre Vertical Underground Tank with Poly Lid and Gasket - Class A Loads Only 1,200 Litre Vertical Underground Tank with Poly Lid and Gasket - Class A Loads Only 2,000 Litre Vertical Underground Tank with Poly Lid and Gasket - Class A Loads Only 3,000 Litre Vertical Underground Tank with Poly Lid and Gasket - Class A Loads Only 4,000 Litre Vertical Underground Tank with Poly Lid and Gasket - Class A Loads Only
VUT-600A
VUT-900A
VUT-1200A
VUT-2000A
VUT-3000A
VUT-4000A
Class B and Class D Lids available.
2024 | © Coerco
7
Wastewater Systems Septic Tanks
Coerco offers a range of poly septic tank systems which are easily adaptable to suit any requirement and are approved by the Department of Health WA. Manufactured from polyethylene, these products are lightweight, resilient and very flexible to allow easy transportation and installation whilst delivering the perfect desired functionality.
Australian Standard AS1546.1 Lic SMK40330 SAI Global
Australian Standard AS1546.1 Lic SMK40330 SAI Global
SEP-3200 (Baffled)
SEP-4000 (Baffled)
SEP-11000
SEP-4000
SEP-7000
SEP-23000
SEP-15000
SEP-19000
SEP-27000
SEP-31000
Septic Tanks
Features • Lightweight, easy to transport and install • Manufactured from durable polyethylene • Anti floatation ring and ribbing incorporated into design • Certified to Australian Standard AS/NZS1546.1 and approved by Department of Health - WA • Supplied as complete kit including lid, inlet and outlet ‘T’ pieces • Leach drain systems also available (Refer to page 31)
Code
Description (mm)
3,200 Litre Septic Tank (2150D x 1745H)
SEP-3200
SEP-4000
4,000 Litre Septic Tank (2200D x 1770H)
SEP-7000
7,000 Litre Underground Septic Tank
SEP-11000
11,000 Litre Underground Septic Tank
SEP-15000
15,000 Litre Underground Septic Tank
SEP-19000
19,000 Litre Underground Septic Tank
SEP-23000
23,000 Litre Underground Septic Tank
SEP-27000
27,000 Litre Underground Septic Tank
SEP-31000
31,000 Litre Underground Septic Tank
Septic Tank Accessories
Code
Description (mm)
EFD-100
100mm Effluent Diverter
8
2024 | © Coerco
Wastewater Systems Aerobic Treatment Units
Coerco offers a range of Aquarius® ATUs designed to effectively process wastewater from both residential and commercial properties. These systems efficiently handle wastewater from toilets, kitchens, bathrooms, and laundries, treating it to meet the stringent standards set by the Department of Health, WA. This treatment allows the recycled water to be safely used for irrigating garden beds, orchards, and more, or for dispersal into leach drains, soak wells, and aqua-safe drains. Our O-2 NR and O-3 models go a step further by reducing phosphorous and nitrogen levels in the water, making them particularly beneficial for water catchment areas, environmentally sensitive zones, and in meeting local shire regulations. These models are recognised for their nutrient-retentive capabilities, which are crucial for environmental conservation. Moreover, the Aquarius® O-3 stands out as our most eco-friendly option. It employs Ozone in its final disinfection stage, surpassing chlorine in effectiveness and leaving oxygen as its only by- product.
Treatment Process
0-3 0-2 NR 0-2
Primary Tank Retains the solids and uses aerobic and anaerobic bacteria to breakdown the BOD 5 levels in the sewage Alum Tank Doses the clarifying chamber of the treatment tank with alum. Alum acts as a flocculent to remove the nutrients and suspended solids and settle them to the bottom of the tank for further aerobic bacteria breakdown.
✔ ✔ ✔
✔ ✔
TREATMENT TANK
Secondary/Aeration Chamber Incorporates aeration to further break down BOD 5 and nitrates. Clarifying/Discharge Tank The Clarifying Chamber provides a set- tling and clarifying period for the water prior to discharge. Discharge Chamber The Discharge chamber contains the Discharge Pump to pump the treated water out to irrigation or other disposal methods. Ozonation Pump Ozone is a powerful disinfectant, many times more effective than chlorine and kills bacteria. DoH WA ATU Water Quality Criteria <20mg/L BOD 5 <30mg/L suspended solids <10 E.coli/100ml <3mg/L Ozone concentration <1mg/L TP <10mg/L TN
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔
✔
2024 | © Coerco
9
Wastewater Systems Aerobic Treatment Units
Aerobic Treatment Units
Number of Bedrooms
1 - 5 Bedrooms
0-3 ATU
0-2 NR ATU
0-2 ATU
6 - 9 Bedrooms
0-3 6KL ATU
0-2 NR 6KL ATU
0-2 6KL ATU
Aquarius® Standard or Custom Designed Commercial Systems Please speak to our Sales Consultant
Commercial
Specifications
0-3 0-2 NR 0-2
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔
✔
System Features Poly/ Duralen Plastic or Concrete Tank Construction
Nutrient Retentive (Phosphorous reduction)
Ozone Disinfection
✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔
Recycles all wastewater through irrigation into gardens, orchards, etc.
Supplied complete with irrigation components, electrical components and pumps
Footprint required approx 6m x 2.5m x 2m**
Low Energy use
Irrigation Area Above Ground Spray Irrigation Sub-Surface Dripper Irrigation Irrigation area in sandy soil conditions - * 150m 2
Other Disposal Options Leach Drains / Soakwells / Aquasafe Drains
Maintenance Service calls per year as per DoH WA requirements
2
2
2
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Manufacturers Warranties Poly/Duralen Plastic Tanks 15 years Orange Pumps 1 year Irrigation and Electrical components 1 year
Approvals Fully approved by the Department of Health
Australian Standards approved AS/NZS 1546.3
Why choose Aquarius Wholly owned West Australian Company
Manufactured in Western Australia
Extensive Support Network covering all of WA
Local Agents fully trained and registered with Department of Health WA
*Subject to local authority approval.
10
2024 | © Coerco
Wastewater Systems Below Ground ATU Systems
Features • Available in Poly/Duralen Plastic or Concrete Tank material • Fully Approved by the WA Department of Health • Western Australia Manufactured and Owned • Recycles all wastewater through irrigation into gardens, orchards, etc. • Australian Standard AS/NZS 1546.3 approved • Low-Energy Use • Low-Maintenance. Only 2 Service Calls yearly.
Domestic Below Ground ATU 1.8kl
Code
Number of Bedrooms
Description
This is a basic Aerated Wastewater Treatment system. With anaerobic, aerobic, clarification, and discharge
O-2 ATU
1 to 5
This is a more advanced Aerated Wastewater Treatment system. With anaerobic, aerobic, clarification, flocculation, and discharge. Nutrient Retentive (Phosporous removal) This system is an even more advanced Aerated Wastewater Treatment system. With anaerobic, aerobic, clarification, flocculation, disinfection (Utilising ozone) and discharge. Nutrient Retentive (Phosporous removal). Environmentally Friendly
O-2 NR ATU
1 to 5
O-3 ATU
1 to 5
2024 | © Coerco
11
Wastewater Systems Below Ground ATU Systems
Our commercial-sized wastewater systems are designed to treat wastewater produced from toilets, kitchens, showers, and in facilities such as caravan parks, mining camps, factories, accommodations, and many more.
Note that many commercial systems are custom-designed, so it is advised to speak with our sales consultant for more information.
Commercial Below Ground ATU 1.8kl to 30kl
Code
Description
This is a basic Aerated Wastewater Treatment system. With anaerobic, aerobic, clarification, and discharge
O-2
This is a more advanced Aerated Wastewater Treatment system. With anaerobic, aerobic, clarification, flocculation, and discharge. Nutrient Retentive (Phosporous removal)
O-2-NR
Nutrient Reductive System - This is another advanced Aerated Wastewater Treatment system. With anaerobic, aerobic, clarification, flocculation, disinfection (Utilising Chlorine) and discharge This system is an even more advanced Aerated Wastewater Treatment system. With anaerobic, aerobic, clarification, flocculation, disinfection (Utilising ozone) and discharge. Nutrient Retentive (Phosporous removal). Environmentally Friendly
O-2-NR-CL
O-3
12
2024 | © Coerco
Wastewater Systems Above Ground ATU System
Above Ground ATU
Code
Description
Plastic commercial system. Above-Ground. Heavy-Duty Plastic Tank. Flat packaged and Modular. Low maintenance. Lightweight. Offers ease of installation and transfer
O-2 6-30KL
This is a more advanced Aerated Wastewater Treatment system. With anaerobic, aerobic, clarification, flocculation, and discharge. Nutrient Retentive (Phosporous removal)
O-2-NR
This system is an even more advanced Aerated Wastewater Treatment system. With anaerobic, aerobic, clarification, flocculation, disinfection (Utilising ozone) and discharge. Nutrient Retentive (Phosporous removal). Environmentally Friendly
O-3
2024 | © Coerco
13
Effluent Disposal Systems Leach Drain Systems
*This flatbed leach drain consists of the flo-cell® product
Flatbed Leach Drain The flatbed leach drain is a major component of our premium septic system and complements our septic tank products. It consists of a central distribution pipe, drainage cells, and geofabric.
Benefits • Approved for use by the Department of Health – Western Australia • Australian Standard 1546: On-site domestic wastewater treatment • Resistant to moulds, algae, soii-borne chemicals, bacteria, and bitumen • 15-year warranty • An estimated life span of over 100 years if there are no ultraviolet exposure • Flo-Cell has an ultimate compressive strength of 50t/m² • A service temperature of -10°C up to 70 °C • Made of the highest quality polypropylene for durability • Ready-to-use; no assembly required • Lightweight - easy to transport and install
Flatbed leach drain drainage cell
Applications • Trench Drainage • Sub-soil Drainage • Wall & Foundation Drainage • Sub-surface Drainage • Podium Landscape • Sports Fields
Flatbed leach drain central distribution pipe
Flatbed Leach Drain Installation
1. Level & compact site then lay out centre distibution pipe.
2. Lay out drainage cells on either side.
3. Lay Geo-Fabric on top and backfill.
14
2024 | © Coerco
Effluent Disposal Systems Leach Drain Systems
Coerco offers two different versions of flatbed leach drain – the standard flatbed has three layers, and the sand/ loam flatbed has two layers. The standard flatbed can be used for any soil category, while the sand/loam flatbed is suitable for soil categories 1 to 3 (sand, gravel, and loam). Flatbed Leach Drain Types
Modular Leach Drain
Coerco’s modular leach drain systems are design to integrate efficiently with our septic tank units although can be utilised in any waste water situation requirement that requires a leaching system. Manufactured from strong light weight polypropylene, they are an easy to install, cost effective solution for effluent waste issues. They are flat packed for portable and efficient logistics. The systems are very flexible with a range of configurations for every individual requirement and designed to meet strict industry regulations and standards.
Retention
Infiltration
Storage
Features • Made from 100% recycled material • Light weight • Modular • 95% void area • Strong • Service temperature from -20 o C – 120 o C
• Polypropylene • Flat pack form
Benefits • Environmentally friendly
• Simple to install • Easy to deliver • Cost effective • Chemically inert • Not affected by mould or algae
• UV stabilised • Water saving • 100% recyclable
*These modular leach drains consist of the Protank product.
2024 | © Coerco
15
Effluent Disposal Systems Spray and Drip Irrigation Systems
Drip Irrigation System
A dripper field is several interconnected purple dripper reticulation pipes that form a closed reticulation system that is used to water landscaping or lawn using suitably treated wastewater. A dripper field’s size and design are determined by the hydraulic loading and the soil type on the property.
NB: Dripper irrigation cannot be connected to a septic tank as a disposal system.
The dripper field is usually installed as a subsurface system; however, above-ground sprinklers can be utilized if the treated wastewater has been disinfected using chlorine or ozone.
Spray irrigation System
Code
Description
SPR-150-AG 150m2 Spray Irrigation Kit (Above Ground)
Drip Irrigation System
Code
Description
DRI-150-STD
150m2 Drip Irrigation Kit (8LPH, Standard)
DRI-250-STD
250m2 Drip Irrigation Kit (8LPH, Standard)
DRI-150-PRV 150m2 Drip Irrigation Kit (3.5LPH, Compensating)
DRI-250-PRV 250m2 Drip Irrigation Kit (3.5LPH, Compensating)
Spray Irrigation System
16
2024 | © Coerco
Grease Arrestors Grease Arrestors
APPROVED
GA-1200 (Coming Soon)
GA-2000 (Available Now)
GA-4000 (Coming Soon)
Grease Arrestors
Features • Durable and robust
Lid NoTraffic
Lid Class B
Lid Class D
Code
Description
• Water Corporation approved • Different manhole lids available • Optional above ground installation
✔ ✔ ✔
GA-1200
1,200Ltr Grease Arrestor (Coming Soon)
✔ ✔ ✔
GA-2000
2,000Ltr Grease Arrestor
✔ ✔ ✔
GA-4000
4,000Ltr Grease Arrestor (Coming Soon)
Solid Cast Iron Lid
Code
Description
COMP-33-58
Class B Circular Solid Cast Iron Lid, C&F (600mm Diameter)
COMP-33-59
Class D Circular Solid Cast Iron Lid, C&F (600mm Diameter)
Class D Circular Solid Cast Iron Lid, C&F (600mm Diameter)
2024 | © Coerco
17
Transfer Pump Stations Transfer Pump Stations
*pumps for illustration purpose only
Features • Custom built to suit any pump size or design • Tested one piece tough poly tank • Chemical and impact resistent • Manufactured from durable, light weight polyethylene • Ease of installation
18
2024 | © Coerco
Stormwater Systems Flo-Vault ®
Flo-Vault®
Optional Filter
Features • Class leading compressive strength: 40t/m² • Efficient design for great transport savings • High infiltration rate • Significant savings on assembly time: up to 300m³/day with 4 people • Allows for camera inspection and high pressure jetting
Filter options, small and large:
Applications
• Infiltration • Detention
• Retension / reuse • Light structural fill
Flo-Vault ®
Dimensions
(H) 500mm (W) 575mm (L) 575mm l (H) 22.63” (W) 22.64” (L) 22.64”
Ultimate Strength
40 tonnes/SQM (56.9 PSI) *Ultimate strength till failure (not yield)
Gross Volume
0.165m3 (5.838 ft3)
Modules Per Volume
6.06 modules per m3 (0.17 modules per cubic ft)
Void Ratio
95%
Material
85% Recycled Polypropylene 15% Proriety Selected Materials
Colour
Black
Chemical & Biological Resistance Unaffected by molds, algae, soil-bourne chemicals. bacteria and bitumen
Service Temperature
-10°C - 70°C (14F° - 158F°)
Approximate Material Lifespan 100 years + with no ultra violet exposure
2024 | © Coerco
19
Stormwater Systems Flo-Void ®
Features • Excellent strength to weight ratio • Excellent drainage • Allows liquids & gas flow • Easy to handle on site • Made from recycled materials • Multiple use plastic (can be made into new products)
20
2024 | © Coerco
Stormwater Systems SportsDry
Features • Quick drainage during the heaviest rainfall • Capture clean and recycle 100% of water at point source • Ideal for artificial turf playing fields • Self cleaning and require little or no maintenance • Soil profile retains sufficient moisture for healthy grass growth
2024 | © Coerco
21
Stormwater Systems Titan Tank ®
Titan Tank ®
Features • Modular Underground Tank System for Heavy Loads • Easy to construct • Provide an interlocking system that forms a rigid blanket layer of 50mm in thickness metre Applications
Part Number
80050
Width
575mm
Height
50mm
Length
575mm
4.95 kg/m 2
Weight
• Mining • Airport • Military applications • High water table applications
Flow Rate
2.56 Litres/Sec/m @ 1% gradient
22
2024 | © Coerco
Stormwater Systems Flo-Grid ®
Flo-Grid®
Flo-Grid ®
Features • Durable and environmentally friendly • Made from 100% recycled plastic • Can withstand up to 247 tonnes per square metre
Part Number
8008
Width
400mm
Height
48mm
Applications • Road edge (water infiltration) • Permeable paving
Length
685mm
Pieces per m2
3.65
• Raingardens • Parking lots • Pathways & trails • Accessibility ramps • Raised walkways
2024 | © Coerco
23
Stormwater Systems Flo-Tank ®
Invented by Atlantis in 1993
Flo-Tank®
Features • Efficient flatpack design for great transport savings • High infiltration rate • Optimisable Ultimate Strength (3-9 small plates per modules) • Optional Flo-Arch® row for inspection and cleaning • Can also be used to create void for planter boxes
Applications
• Infiltration • Detention
• Retension / reuse • Light structural fill
24
2024 | © Coerco
Stormwater Systems Flo-Cell ®
Flo-Cell ® (SWM-FC-50)
Code
SWM-FC-50
Part Size
(H) 50mm (W) 575mm (L) 575mm | (H) 1.97” (W) 22.64” (L) 22.64”
Weight Per Square Metre
4.95 kg
Flow Rate
2.56 Litres/Sec/m @ 1% gradient
Pieces Per Square Metre
3
Material
85% Recycled Polypropylene 15% Propriety Selected Materials
Colour Black Chemical & Bilogical Resistance Unaffected by molds, algae, soil-bourne chemicals, bacteria and bitumen. Service Temperature -10° C - 70° C ( 14 F° - 158 F° ) Approximate Material Lifespan 100 years + with no ultra violet exposure
2024 | © Coerco
25
Stormwater Systems Flo-Cell ®
Flo-Cell ® (SWM-FC-30)
Code
SWM-FC-30
Part Size
(H) 30mm (W) 575mm (L) 575mm | (H) 1.18” (W) 22.64” (L) 22.64”
Weight Per Square Metre
1.95 kg
Flow Rate
1.41 Litres/Sec/m @ 1% gradient
Pieces Per Square Metre
3
Material
85% Recycled Polypropylene 15% Propriety Selected Materials
Colour Black Chemical & Bilogical Resistance Unaffected by molds, algae, soil-bourne chemicals, bacteria and bitumen. Service Temperature -10° C - 70° C ( 14 F° - 158 F° ) Approximate Material Lifespan 100 years + with no ultra violet exposure
Flo-Cell ® (SWM-FC-20)
Code
SWM-FC-20
Part Size
(H) 20mm (W) 406mm (L) 620mm | (H) 0.78” (W) 15.98” (L) 24.40”
Weight Per Square Metre
2.2 kg (0.45 lbs/ft2
Flow Rate
In-Plane Flow Rate @ 1% gradient (BS EN ISO:12958)
Pieces Per Square Metre
3.98
Material
85% Recycled Polypropylene 15% Propriety Selected Materials
Colour
Black
Chemical & Bilogical Resis- tance
Unaffected by molds, algae, soil-bourne chemicals, bacteria and bitumen.
Service Temperature
-10° C - 70° C ( 14 F° - 158 F° )
Approximate Material Lifespan 100 years + with no ultra violet exposure
26
2024 | © Coerco
Stormwater Systems Subsurface Drainage
Features • High compressive strength • Lightweight construction • Low cost and easy installation • Durable and resistant to all ground chemicals • Made from selected recycled materials
Flo-Cell ®
Flo-Cell ®
Flo-Cell ®
Flo-Cell ®
20mm
NEO 30mm
FLEX 30mm
50mm
80020
80033
80037
80050
Part Number
(H)20 x (W)406 x (L) 620mm (H)30 x (W)575 x (L) 575mm (H)30 x (W)575 x (L) 575mm (H)50 x (W)575 x (L) 575mm
Size Metric
(H)0.7” x (W)16” x (L) 24.4”
(H)1.18” x (W)22.6 x (L) 22.6” (H)1.18” x (W)22.6 x (L) 22.6” (H)2 x (W)22.6 x (L) 22.6”
Size Imperial
0.65 L/s/m @ 1% gradient
1.41 L/s/m @ 1% gradient
1.41 L/s/m @ 1% gradient
2.65 L/s/m @ 1% gradient
Flow Rate
3.97
3
3
3
Pieces per m 2
2024 | © Coerco
27
Stormwater Systems Trench Drainage
Applications • Drains for agriculture • Drains for mining
• Ditch and strip drainage • Retaining wall drainage • Edge drains for roads • Sports field drainage systems • Drainage retaining walls • Other requirements for dispersion of water in the subsoil Benefits • Easy installation • Economic • No maintenance costs • Simple connection to wells and pipes • Light and easy to transport
• Very high flow rate of 80 / min • High resistance to compression • High flow velocity • Economical and modular design
Flo-Log ® and Flo-Pipe ® - Trench Drainage
Part Number
70003FC 70004FC 70005FC 70006FC 70007FC 70008FC 70009FC
mm 450
880
1,310 51.57 0.348 12.28
1,740 68.50 0.462 16.31
2,170 54.43 0.576 20.34
2,600
3,030
Height
Inch
17.71 0.119
34.64 0.234
102.36 119.29
m3
0.690 24.38
0.804 28.41
Gross Volume
ft3
4.22
8.25
litre
119.48 233.65 347.81 461.98 576.15 690.32 804.48
Storage Capacity
US Gallon 31.56
61.72 14.10 31.08
91.88 20.60 45.41
122.04 152.20 182.36 212.52
Kg
7.60
27.10 59.74
33.60 74.07
40.10 88.40
40.60
Part Weight*
Lbs
16.75
102.73
4.28
2.88
2.16
1.74
1.45
40.60
Modules per m3 35.31ft3 8.37
28
2024 | © Coerco
Stormwater Systems Flo-Wall ®
Features • High cohigh compressive strength • Wrapped with a high quality Italian made geotextile with hydrophilic properties • Unlimited length
Applications
• Retaining walls • Foundation walls • Basements • Underground parking • Bridge abutments and abutments • Civil works • Tunnels in areas that require hydrostatic pressure relief
30014 10431 10438 10434
11313 *Custom sizes available upon request
Flo-Log ® and Flo-Pipe ® - Trench Drainage
Part Number
30014
10431
10438
10434
11313
100 mm
575 mm
575 mm
575 mmm 1150mm
Width
3.93 in
22.64 in
22.64 in
22.64 in
45.23 in
1080 mm 1150 mm 1725 mm 2300 mm 1150mm 42.52 in 45.23 in 67.91 in 90.55 in 45.23 in
Height
80 mm
30 mm
30 mm
30 mm
30 mm
Thickness
3.14 in
1.18 in
1.18 in
1.18 in
1.18 in
0.62 kg
1.30kg
1.95kg
2.60 kg
2.60 kg
Part Weight
1.37 lbs
2.87 lbs
4.30 lbs
5.73 lbs
5.73 lbs
Vertical Flow Rate per panel*
8.51 L/sec/ /width
8.51 L/sec/m /width
8.51 L/sec/m /width
8.51 L/sec/m /width
Volume Void: 90%
Surface Void: 70%
Void Ratio
85% Recycled polypropylene, 15% Atlantis proprietary selected materials
Material
Black
Colour
Excellent resistance to urine, acids, alcohol, bases and mineral oils, good resistance to alde - hydes, esters, alipathic hydrocarbons, ketones and vegetable oils.
Chemical & Biological Resistance
Service Temperature -10°C to 70°C (14F° to 158F°) Approximate Material Lifespan
100 years + with no ultraviolet exposure
*Panel is positioned vertically as pher graphics above with gravity flow. Hydraulic: (H..G) = 1.0
2024 | © Coerco
29
Notes
30
2024 | © Coerco
Notes
2024 | © Coerco
31
Get in touch today for a no obligation chat and free quotation. 1800 646 277 info@coerco.com.au coerco.com.au
23 Harris Road Malaga Western Australia, 6090
Coerco Pty Ltd ABN 54 145 356 565
32
2024 | © Coerco
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32Made with FlippingBook interactive PDF creator