SUSPENSION
Ball Joint Adapter Sleeve ALL56256 Adapter sleeve is ideal for modifying stock style Chevelle lower control arms to accept a screw- in style ball joint. Adapter sleeve has an O.D. of 2.010" to take the place of a press-in style ball joint (ALL56210/K5103) allowing for installation of a
Unwelded Ball Joint Holder Kit ALL56298 Kit allows components bracket has a 3/8" hole. Holder accepts ALL56214 style screw-in upper ball joint. Female Double Adjusters Steel double adjusters increase adjustment capability of control arms, trailing arms, Pan- hard bars, tie rod ends and other items using threaded tube. Adjuster includes two jam nuts. Part No. to be welded at any angle. Stud is 5/8"-18 RH thread,
screw in style ALL56214 with a (1.5" taper/ft.) pin or ALL56049 ZLWKD WDSHUIW SLQEDOOMRLQW1RWH 0RGL¿FDWLRQVWRFRQWURO DUPVPD\EHQHFHVVDU\IRUSURSHU¿WRIVOHHYH6OHHYHPXVWEH welded to the control arm after installation. Metric Upper Control Arms
8SSHUFRQWURODUPV¿WVWRFNPRXQWV found on Mid-size GM metric frames. Use with bolt-in style ball joint, Allstar 56220 or Moog K5208. Steel control arms have a steel cross shaft with holes spaced 6-7/8" on center. Part No. Description ALL57990 RH, 8" ALL57992 LH, 8-1/2" ALL57994 LH, 9" ALL57995 LH, 9-1/2" ALL57996 LH, 10" IMCA Legal Upper Control Arms ,0&$OHJDOXSSHUFRQWURODUPV¿WVWRFN 6-7/8" mounts, found on Mid-size GM metric frames. Use with bolt-in style ball joint, Allstar 56220 or Moog K5208. Steel control arms are available with steel or aluminum cross shaft and come complete ZLWK,0&$FHUWL¿HGVWLFNHU Part No. Description ALL57830
Description
ALL56198 ALL56199
5/8"-18 RH Male/LH Female, 4" Long 5/8"-18 LH Male/RH Female, 4" Long
ALL57990
Steel and Aluminum Clevises 3/4" clevises attach strut rod to A-frame (3/4"-16 thread with a 1/2" hole). 5/8" clevises, commonly used with Lefthander style upper A-arms, connect to ball joint holder (5/8"-18 thread with a 3/8" hole).
.230 "
.230 "
1.000"
4.000"
3.460"
ALL57831
2.000"
Right Hand 8" With Steel Cross Shaft Left Hand 8-1/2" With Steel Cross Shaft Right Hand 8" With Aluminum Cross Shaft Left Hand 8-1/2" With Aluminum Cross Shaft
ALL57831 ALL57832 ALL57833
ALL56192, ALL56193
ALL56194
Part No.
Description
ALL56192 ALL56193 ALL56194
3/4" RH Steel
3/4" RH Aluminum
Ball Joint Holders Holders are ideal for those who fabricate their own control arms. The holders have a 5/8" male RH thread and a 3/8" hole, commonly used with a clevis. Holders accept screw-in ball joints, sold separately.
5/8" RH Steel
Slotted Upper Control Arm Bracket Kit ALL60077 Kits contain (2) slotted brackets, (2) centered bushings, (2) reducer spacers for 5/8" rod end along with a 1/2" bolt and nyloc nut. Offset alumi- num bushings (sold separately) allow for plenty of adjustment options. Part No. Description Related Components ALL60078 Slotted Upper Brackets (Pair) ALL60080 Centered Bushings (Pair) ALL60081 1/8" Offset Bushings (Pair) ALL60082 1/4" Offset Bushings (Pair) ALL60083 3/8" Offset Bushings (Pair) ALL60084 1/2" Offset Bushings (Pair)
ALL56296 ALL56297
ALL56290
ALL56294
ALL56295
ALL56292
Part No.
Description
ALL56290 ALL56292 ALL56294 ALL56295 ALL56296 ALL56297 ALL56194 ALL56214
LH Angled Stud, Angled Tab, Standard Spread RH Angled Stud, Straight Tab, Standard Spread LH Angled Stud, Angled Tab, Wide Spread RH Angled Stud, Straight Tab, Wide Spread Universal Straight Stud, Straight Tab, Wide Spread Universal Design (ALL56296) Angled At 15 Degrees
5/8" RH Steel Clevis (Commonly Needed) Screw-In Ball Joint (Most Common)
100 2019-20 CIRCLE TRACK PARTS AND ACCESSORIES
Made with FlippingBook flipbook maker