SUSPENSION
Upper Control Arm Brackets ALL60025 Stamped 3/16" mild steel brackets weld to chassis as a mounting point for upper control arm. Brackets have two 5/8" holes, spaced 7/8" apart for adjustment. May be trimmed to desired height. Upper Control Arm Mount ALL60190 0RXQWLVÀDPHFXWIURPWKLFNVWHHO with a 6" bolt spacing. Welds to frame and accepts upper A-arm.
Roller Bearing Lower Control Arm Bushings Free up stock front suspensions and help pre- vent binding commonly found with stock rubber and steel insert bushings. Steel bodied bush- ings are complete with needle roller bearings and hardened inserts that are ready to install and do not require special mounting hardware. All bushings have 1/2" I.D. mounting holes. Part No. Application Bushing Position O.D. UHL Hole Size Chevelle, Monte Carlo, GM Intermediates ALL56221 1964-66 Front (2nd Design) 1.345" 2.100" .500" 1967-74 Front 1.345" 2.100" .500" ALL56223
1964-66 Front (1st Design) 1.645" 2.100" .500" 1975-77 Front 1.645" 2.100" .500" 1964-72 Rear 1.645" 2.100" .500" 1978-88 Rear 1.645" 2.100" .500"
ALL56222
Upper Control Arm Shims ,QGLYLGXDOVWHHOVKLPV¿WEHWZHHQWKH upper control arm and chassis mount to adjust caster and camber. Shims have 9/16" wide slots and easy to grasp tabs for installation and removal. Package of 10. Part No. Description 1-Piece Upper Control Arm Shims Use shims to easily adjust caster and camber. Dual mount shims are for use with 6" on center control arms. Shims are slotted for 1/2" bolts. Sold each. Part No. Description ALL60203 1/8" (0.125") ALL60204 3/16" (0.185") ALL60205 1/4" (0.250") ALL60206 3/8" (0.375") ALL60207 1/2" (0.500") ALL60208 3/4" (0.750") ALL60209 1" (1.00") ALL60210 7-Piece Kit, Includes ALL60203-60209 (one of each size) 1978-88 Metric Front Lower Control Arms Reproduction of the originals, these new arms are a direct replacement for 1978-88 metric chassis and accept stock ball joints. Part No. Description ALL57804 RH ALL57805 LH 1964-72 Chevelle Lower Control Arms ALL60201 ALL60200 ALL60201 1/16" (0.062") 1/8" (0.125")
ALL56223 1973-77 ALL56224 1978-88 Camaro, Firebird ALL56221 1967-74 ALL56222 1975-81 ALL56223 1973-88 ALL56224 1982-92 1967-72
Rear Front
1.900" 2.100" .500" 1.440" 2.750" .500"
Front Front Rear Rear Front
1.345" 2.100" .500" 1.645" 2.100" .500" 1.645" 2.100" .500" 1.900" 2.100" .500" 1.440" 2.750" .500"
Part No.
Description
Related Parts ALL56226
Nylon Bushing Kit (Optional bushings to replace roller bearings when conforming to some sanctioning body rules.)
Steel Control Arm Bushings Allstar Steel Control Arm Bushings replace VWRFNUXEEHUEXVKLQJVDQGHOLPLQDWHGHÀHFWLRQ a common problem with original equipment bushings. LOWER CONTROL ARM BUSHING APPLICATIONS Part No. Application Bushing Position O.D. UHL
ALL56230
Hole Size
Chevelle, Monte Carlo, GM Intermediates ALL56230
1964-66 Front (2nd Design) 1.345" 2.100" .500" 1967-74 Front 1.345" 2.100" .500" 1964-66 Front (1st Design) 1.645" 2.100" .500" 1975-77 Front 1.645" 2.100" .500" 1964-72 Rear 1.645" 2.100" .500" 1978-88 Rear 1.645" 2.100" .500"
ALL56232
ALL56233 ALL56234 ALL56235 ALL56236
—
— 1.645" 2.100" .562"
1973-77
Rear
1.900" 2.100" .500"
—
— 1.900" 2.100" .562"
1978-88
Front
1.440" 2.750" .500"
Camaro, Firebird ALL56230
1967-74 1975-81 1967-72 1973-88 1982-92
Front Front Rear Rear Front
1.345" 2.100" .500" 1.645" 2.100" .500" 1.645" 2.100" .500" 1.900" 2.100" .500" 1.440" 2.750" .500"
ALL56232 ALL56234 ALL56236
5HSURGXFWLRQVRIWKHSRSXODU\HWKDUGWR¿QG 1964-72 A-body lower control arms are coated DQGKDYHWKHVDPH¿WDQGDSSHDUDQFHDV the factory arms. While both arms are
UPPER CONTROL ARM BUSHING APPLICATIONS Part No. Application Bushing Position O.D.
UHL Hole Size
made to meet the same tolerance as the original, the deluxe arms are a version that have a more precise
Chevelle, Monte Carlo, GM Intermediates ALL56238 1967-72 All
ALL57800 ALL57802
1.275" 1.250" .675" 1.530" 1.500" .695" 1.394" 1.500" .690" 1.311" 1.425" .690" 1.275" 1.250" .675" 1.394" 1.500" .690" 1.311" 1.425" .690"
ALL56240 ALL56242 ALL56244
1978-88 1973-77 1973-77 1967-69 1974-79 1974-79
All
spring pocket to better accept springs with larger wire diameters typically found with heavier rated racing springs and offer more consistent suspension geometry. Part No. Description ALL57800 RH ALL57801 LH ALL57802 RH Deluxe ALL57803 LH Deluxe
Front Rear
Camaro, Firebird ALL56238
All
ALL56242 ALL56244
Front Rear
101
2019-20 CIRCLE TRACK PARTS AND ACCESSORIES
Made with FlippingBook flipbook maker