SUSPENSION
Aluminum Backing Washer ALL64326 Aluminum washer is designed for use with bump stop pucks, as a backer washer or many other uses. Washer has a 2-1/4" O.D., 5/8" I.D. and is 3/16" thick. Bump Stop Shims
Shock Shims Uniquely designed shock shims are placed directly onto the shock shaft to VLPSOLI\¿QHWXQLQJRIWKHFKDVVLV without disassembling the shock or even removing the shock from the chassis. Kits include a variety of shim designs and sizes for conve- nient tuning and set-up. Size Starter Kit
Place within the bump stop stack to limit suspension travel. 2" O.D. shims work with most bump stop bushings. Part No.
ALL64404
Standard Kit ALL64402 ALL64442
Deluxe Kit
ALL64324
ALL64325
14mm 16mm
ALL64400 ALL64440
ALL64404 ALL64444
Description
ALL64324 ALL64325
1/16" Shim 1/8" Shim
STARTER KIT Includes: U-Shaped Shims 1/16" (4 pcs), 1/8" (4 pcs) and 3/8" (2 pcs); Semi-Solid Shims 1/16" (4 pcs) and 1/8" (4 pcs). STANDARD KIT Includes: U-Shaped Shims 1/16" (12 pcs), 1/8" (12 pcs) and 3/8" (6 pcs); Semi-Solid Shims 1/16" (12 pcs) and 1/8" (12 pcs); 2-Piece Collar Shims 1/2" (2 pcs), 3/4" (2 pcs) and 1" (2 pcs); Storage Case. DELUXE KIT Includes: U-Shaped Shims 1/16" (12 pcs), 1/8" (24 pcs) and 3/8" (10 pcs); Semi-Solid Shims 1/16" (12 pcs) and 1/8" (24 pcs); 2-Piece Collar Shims 1/2" (6 pcs), 3/4" (6 pcs) and 1" (6 pcs); Storage Case. Shock Shim Components U-SHAPED SHIMS Designed for quick removal and installation into tight stacks and locations where twisting the shim into the stack is not an option or when the car is RQWKHJURXQG&RPPRQO\XVHGIRU¿QHWXQLQJWKH suspension. SEMI-SOLID SHIMS Designed for quick removal providing a secure installation that will not fall out yet requires 3/4" of space to install or remove. Typically installed when WKHYHKLFOHLVRIIWKHJURXQG&RPPRQO\XVHGIRU¿QH tuning the suspension. 2-PIECE COLLAR SHIMS Designed to attach around the shaft of the shock and secure in place with a zip tie. Commonly used during initial set-up or to take up a large amount of travel. Description 2-Pack 10-Pack 25-Pack ALL64416 ALL64412
Bump Stop Components For Bilstein Shocks Many bump stop options are available today. These compo- nents are for use with Bilstein shocks. Part No. Description ALL64274 Bump Stop Lower Support For Roller Skate Wheel Stops ALL64275 Bump Stop Cup Fits The Bilstein Rod End ALL64276 ALL64277
ALL64276 Rod Guide Protector Puts The Bump Stop Forces Into The Shock Body, Not The Rod Guide ALL64277 Splitter Washer Used To Separate Stops On Stacked Stop Setups Shock Bump Rubbers
ALL64275
Option
ALL64274
&RQLFDOVKDSHGEXPSUXEEHUV¿WRQPRVWVKRFN shafts up to 16mm to limit shock travel. Bump rubbers are 2-3/8" tall and have a 2" O.D. base. A letter designation is molded in the bottom to identify compound. Part No. Description ALL64500 Soft (40 grams) ALL64501 Medium (50 grams) ALL64502 Hard (55 grams) 14mm Bump Stop Kit ALL64360 Kit makes it easy to start using bump stops.
Includes a selection of 20 bump stop pucks ranging from 50 to 75 durometer, 8 backing washers and 16 packer shims in a simple plastic carrying case.
ALL64420
14mm (.550")
U-Shaped Shim 1/16" U-Shaped Shim 1/8" U-Shaped Shim 3/8" Semi-Solid Shim 1/16" Semi-Solid Shim 1/8"
— ALL64410 ALL64410-25 — ALL64412 ALL64412-25 — ALL64414 ALL64414-25 — ALL64416 ALL64416-25 — ALL64418 ALL64418-25
2-Piece Collar Shim Kit 1/2" 2-Piece Collar Shim Kit 3/4" 2-Piece Collar Shim Kit 1"
ALL64420 ALL64420-10 ALL64422 ALL64422-10 ALL64424 ALL64424-10
— — —
Shock Bump Covers These neoprene covers are perfect for protecting shock shafts and covering bump set ups. Fit 2" O.D. shocks. Not for use with over coil over springs. Part No. Description ALL64216 10" Tall Cover ALL64218 14" Tall Cover
16mm (.630")
U-Shaped Shim 1/16" U-Shaped Shim 1/8" U-Shaped Shim 3/8" Semi-Solid Shim 1/16" Semi-Solid Shim 1/8"
— ALL64450 ALL64450-25 — ALL64452 ALL64452-25 — ALL64454 ALL64454-25 — ALL64456 ALL64456-25 — ALL64458 ALL64458-25
2-Piece Collar Shim Kit 1/2" 2-Piece Collar Shim Kit 3/4" 2-Piece Collar Shim Kit 1"
ALL64460 ALL64460-10 ALL64462 ALL64462-10 ALL64464 ALL64464-10
— — —
105
2019-20 CIRCLE TRACK PARTS AND ACCESSORIES
Made with FlippingBook flipbook maker