SUSPENSION
Weld-On Shock Brackets Weld-on shock brackets mount standard and coil-over shocks with 1/2" I.D. inner bushing or 1/2" rod end to chassis as well as many other uses. 1/8" thick mild steel brackets include 1/2" bolt, spacer and locknut. NOTCHED TUBE MOUNT Bracket is notched for 1-1/2" - 1-3/4" round tubing to create a gusset style mount that welds on three sides. Notched design positions the bracket perpendicular to the tubing at a 90 degree angle for straight mount and approximately a 75 degree angle for angled mounts. STRAIGHT MOUNT
Steel Shock Quick Pins Steel shock quick pins allow coil-over shocks to be quickly serviced or changed. ALL60108 will work with Allstar coil-over brackets eliminating the need for a separate bushing. ALL60109 is commonly used on non-bushing type brackets, but can be used with Allstar brackets along with bushing. Shock quick pins are 2-1/2" long and include a hairpin. Part No. Description ALL60108 Shock Quick Pin With Shoulder Titanium Shock Quick Pins Titanium shock quick pins allow coil-over shocks to be quickly serviced or changed. ALL17120 has a long shoulder and will work with Allstar coil-over brackets eliminating the need for a separate bush- ing. ALL17121 is commonly used on non-bushing type brackets, but can be used with Allstar brackets along with bushing. Shock quick pins are 2-1/2" long and include a hairpin. Part No. Description ALL17120 Quick Pin With Shoulder Suspension Limiter Single bushing suspension limiter is common- ly used on the chassis LR or RR to limit travel during acceleration “hike up” and control roll steer. Double bushing limiter is often used on the lift bar to control lift bar travel on decelera- tion. Bushing design reduces or absorbs shock when suspension is limited and helps reduce tire unloading. Top plate is drilled to attach a 1/2" rod end when used in a shock mount or for attaching to a weight jack bolt with 7/16"-20 internal threads using optional chrome moly stud ALL64304. Clevis has a 3/8" hole for simple attachment to a chain or cables. Part No. Description ALL64300 Single Bushing Limiter ALL64302 Dual Bushing Limiter ALL64304 Chrome Moly Stud With Jam Nut Limiter Chain Kits Commonly used to limit rear sus- pension or lift bar travel. Chain kit will accept a bolt or pin or may be PRGL¿HGWRDFFHSWXSWRDEROW Offered in 3/16" or 5/16" x 18" long, chain may be easily cut to required length. Shrink sleeve installs over chain and when heated with a heat gun shrinks to keep chain in position, preventing binding or catching. Part No. Description ALL64312 Limiter Chain Kit, 3/16" x 18" Long ALL64314 Limiter Chain Kit, 5/16" x 18" Long Related Component ALL64313 3/16" x 18" Long Chain Only ALL60109 ALL18442 Shock Quick Pin Without Shoulder 1-5/8" Replacement Hairpins, 2-Pack ALL17121 Quick Pin Without Shoulder
ALL60108
ALL60109
ALL17120
ALL60103
ALL60104
ALL60112
Part No.
Description
ALL60103 ALL60104 ALL60112 ALL60113
Short Single Long Single
ALL17121
Long Two Position
ALL60113
Extra Long Three Position
ANGLE MOUNT
ALL60100
Description ALL60101
Part No.
ALL60100 ALL60101
Left Hand Single Right Hand Single
ROUND TUBE MOUNT Bracket mounts paral- lel with tubing and has a curved base to cradle tubing. Bracket is typically mounted above or below tubing. Part No. Description ALL60107 Single ALL60115 Three Position
ALL60115
ALL60107
FLAT MOUNT %UDFNHWPRXQWVWRDÀDWVXUIDFHRUVTXDUHWXELQJ Part No. Description ALL60106 Single Shock Spacers Steel spacers have a 1/2" I.D. and 3/4" O.D. and can be used in a variety of other locations. Package of 2. Part No. Description ALL64280 1/4" ALL64282 1/2" ALL64283 5/8" ALL64284 3/4"
ALL60106
ALL64314
108 2019-20 CIRCLE TRACK PARTS AND ACCESSORIES
Made with FlippingBook flipbook maker