SUSPENSION
Limit Chain Clamps 2-Piece 2-Piece clamp bolts around most 3" O.D. axle tubes providing a lower mounting point for a suspension limit chain. Two piece design features a nylon liner allowing clamp to be installed without removing existing brake brackets and hubs. Part No.
Panhard Bars Panhard bars are formed from 1.250" tubing with 3/4"-16 threads in each end.
For use with 3/4" RH rod ends and clamp-on brackets (ALL60180 or ALL60181). Center-to-center length refer- HQFHLV¿JXUHGLQFOXGLQJURGHQGV5RGHQGVVROGVHSDUDWHO\ Part No. Description ALL56146 29" Center-To-Center ALL56147 30-1/2" Center-To-Center ALL56148 32-3/4" Center-To-Center Adjustable J-Bar Style Panhard Bars mount to the pinion rather than the axle tube to maintain adequate driveshaft clearance. J-bars have 3/4" rods ends and allow up to 2" of adjustment. Part No. Drop Description ALL56155 4" 17-1/2"-19-1/2", 6.2 Lbs. ALL56156 4" 19-1/2"-21-1/2", 6.2 Lbs. ALL56153 6" 17-1/2"-19-1/2", 6.7 Lbs. ALL56154 6" 19-1/2"-21-1/2", 7.0 Lbs. Part No. Description Replacement Parts ALL99050 Replacement Threaded Adjuster ALL99052 Adjuster Nut ALL58072 3/4" Male Moly Rod End Panhard Bar Spacers Spaces Panhard bar away from rear mount- ed power steering, brackets, etc. Aluminum or steel. 3/4" I.D. Part No. Description ALL56144 Aluminum ALL56145 Steel Cut-To-Fit J-Bar Style Panhard Bars length J-Bar with up to a 27" long center to center distance, enough to work with most chassis. Bar is formed from .250" wall 1-1/2" steel tubing, has a 4" drop, includes a threaded insert and rod ends. Part No. Description ALL56141 Bar With Standard Rod Ends ALL56142 Bar With Aircraft Rod Ends ALL56143 Replacement 3/4"-16 Insert Track Bar Locator Brackets Track bar locator brackets are an ideal bolt-on mounting point for rod ends commonly found on Panhard bars, track bars or rear axle housing track locators. For use with 1/2" diameter rod ends. Available with a 5/8" or 3/4" bracket mounting hole. Part No. Description ALL60079 5/8" Hole, 1" Gap ALL60089 3/4" Hole, 1-3/16" Gap ALL56145 ALL56144 Bars are formed from 1-1/2" steel tubing and &XWWR¿WEDULV an unwelded kit offering the ability to build a custom
ALL68337
Description
ALL68336 ALL68337
Steel
Aluminum
1-Piece Limit Chain Clamps 1- Piece bearing style clamp slides over the end of most 3" O.D. axle tubes providing a lower mounting point for a suspension limit chain. Part No. Retainer Clamps 2-Piece Retainer clamp bolts around 3" O.D. axle tubes to keep bird cages, floater brackets and limit chain clamps in position. Two piece design allows clamp to be installed without removing existing brake bracket and hub. Part No. ALL68332 ALL68333
Description
Steel
Aluminum
Description
ALL68338 ALL68339
Steel
Aluminum
Axle Tube Bracket ALL68324 Bracket clamps around 3" wide axle tubes providing a mounting point for a suspension limiter such as a limiting strap or chain. 1" wide bracket has tabs with 1/2" holes. Clamp-On Rings 6WHHOEUDFNHWVEROWWRD[OHWXEHV&KRRVHIURP¿YHZLGWKVLQ 1-, 2- and 4-bolt designs.
ALL60143
ALL60145
Part No.
Description
ALL60143 ALL60144 ALL60145 ALL60146 ALL60147
1-Bolt, 5/8" Wide 2-Bolt, 1" Wide 2-Bolt, 1-3/4" Wide
2-Bolt, 2" Wide 4-Bolt, 3" Wide
109
2019-20 CIRCLE TRACK PARTS AND ACCESSORIES
Made with FlippingBook flipbook maker