SUSPENSION
Steel Radiused Climbing Style Frame Mount Panhard Bar Brackets Steel climbing style adjuster mounts to
Remote Adjustable Panhard Bar Mounts Easily adjusted on frame side of Panhard bar, mount has a thread- ed shaft and fastens to 1-3/4" di- ameter tubing. Standard mount kit has 2" of adjustment, drop mount kit has 5" of adjustment. Each turn of the shaft moves mount .100". Extension rod may be mounted
chassis square tubing and permits Panhard/J- bar adjustment without removing or re-aligning spacers or tabs found on other mounts. Radiused slot eliminates the need to re-square the rear end after adjustments. Part No. Description ALL60236 ALL60237
in rear window or decking for quick, easy adjust- ments from outside of the car. Mounting hardware and a 3/4" Panhard bar bolt are included. Part No. Description ALL60270 Standard Mount Kit ALL60273 Drop Mount Kit Replacement Components ALL60272 Extension Rod With Bushing For ALL60270/ALL60273 ALL60274 Flange Bearing Aluminum Panhard Bar Clevis Black anodized aluminum clevis clamps around a chassis tube and connects to the 3/4" rod end on the long end of a J-bar style Panhard bar. After loosening the two Allen bolts, the clamp may be slid up or down on the chassis tube to adjust the bar and change roll center. Part No. Description ALL60182 1-1/2" I.D. ALL60183 1-3/4" I.D. Ford 9" Panhard Bar Brackets ALL60270
ALL60239
For 1-1/2" Tubing, Center Mounting
ALL60238 ALL60237 ALL60239
For 1-1/2" Tubing, Inside and Outside Mounting
For 2" Tubing, Center Mounting
For 2" Tubing, Inside and Outside Mounting
Aluminum Radiused Climbing Style Frame Mount Panhard Bar Brackets Easily adjust your Panhard bar with only one wrench! Climbing style adjuster allows any amount of adjustment without having to
ALL60273
remove or re-align any spacer/tabs. Radiused slot so you don’t have to re-square the rear end after adjust- PHQWV$OXPLQXPEUDFNHWV¿W[ tubing. Part No. Description ALL60246 Inside/Outside Mounting (Most Modifieds and GRT) ALL60247 Center/Inside Mounting (Mastersbilt, Barry Wright, Hughes) ALL60248 Outside /Center Mounting (Rocket) ALL60249 Center Mounting Clamp-On Panhard Bar Brackets Adjustable steel or aluminum brackets clamp to square tubing, providing multiple Panhard bar mounting locations. Brack- ets are tapped for 3/4"-10 bolts. Steel brackets have outer holes 5" apart. Alu-
ALL60183
ALL60247
Ford center section brackets are 1/2" thick steel or aluminum. Each has four 3/4"-16 mount holes to provide 3.375" of adjustment. Both have dual patterns DQGPD\EHÀLSSHGWRDFFRPPRGDWH right- or left-hand Panhard bars. Both DWWDFKZLWK¿YHEROWV Part No.
ALL60177
ALL60245
Description
ALL60176 ALL60177
Steel Bracket
minum brackets have outer holes 5.5" apart. Hole measurements are center-to-center. Part No. Description Steel Brackets ALL60240 For 2" x 2" Tubing ALL60244 For 1-1/2" x 1-1/2" Tubing Aluminum Brackets ALL60243 Straight, 2.5 Lbs., For 2" x 2" Tubing ALL60245 Angled, 2.0 Lbs., For 2" x 2" Tubing Internal Screw Style Panhard Bar Adjusters ALL56152 A screw bolt style adjuster is welded inside of the tube. When welded in place of
Aluminum Bracket
Double-Sided Ford 9" Panhard Bar Brackets Double-sided, brackets are made of 1/2" steel and accept a right- or left-hand Panhard bar without alteration. Standard thread (3/4"-16") or 3/4" slotted type.
ALL60173
ALL60175
current mount, Pan- hard bar can be easi- ly adjusted by turning the screw bolt. Attach
Part No.
Description
ALL60173 ALL60175 ALL99040
Slotted Double-Sided Threaded Double-Sided
Replacement Spacer For ALL60173
Panhard bar to this adjuster with Allstar ALL60183 Clevis (not included). Rear Panhard mount, 21" tall with 3" of adjustment.
110 2019-20 CIRCLE TRACK PARTS AND ACCESSORIES
Made with FlippingBook flipbook maker